UP: unknown precipitation in METAR reports

Tafrob editorial team · Updated · 5 min read

Short answer

UP means unknown precipitation. It is used only by automated stations, when the sensor detects that precipitation is falling but cannot tell which type it is. FMH-1 codes UP without an intensity sign, while CAP 746 allows one. UP is not used in a TAF. When the present weather sensor itself fails, US reports add PWINO in the remarks instead.

Key points

  • UP is unknown precipitation, reported only by automated stations.
  • The sensor detects that something is falling but cannot identify the type.
  • FMH-1 gives UP no intensity sign; CAP 746 allows UP with an intensity.
  • UP is not used in a TAF: the FAA AIM and NWS Instruction 10-813 both exclude it.
  • REUP is recent unknown precipitation; FZUP appears in UK automated reports.
  • PWINO in US remarks means the present weather sensor is not working, which is different from UP.
Present weather sensor of the Automated Surface Observing System mounted on a mast at Washington Dulles International Airport
Photo: Famartin, CC BY-SA 4.0, via Wikimedia Commons

A code written by machines

UP is the only precipitation code that a human observer never uses. It means that precipitation is falling but that the station cannot say what kind. A person looking out of the window can tell rain from snow; an automated sensor sometimes cannot. UP is the honest answer of a machine that knows something is falling and nothing more. It is coded in the present weather group.

Code Meaning
UP Unknown precipitation (US rules: no intensity)
-UP Light unknown precipitation (UK automated rules)
FZUP Freezing unknown precipitation (UK automated rules)
REUP Recent unknown precipitation
RE// Recent weather missing
PWINO US remark: present weather identifier not operating

What the sources say

FMH-1 gives two definitions that say the same thing in different words. In its definition of precipitation types, UP is reported when the automated station detects the occurrence of precipitation but the precipitation discriminator cannot recognise the type. In its rules for present weather, UP is reported only from automated stations, when the system cannot identify the precipitation with any greater precision. The coding rule is short: at automated stations, precipitation of unknown type shall be coded as UP.

WMO-No. 782 uses the same idea in a note to its present weather table: UP is used when an automatic observing system cannot identify the type of precipitation. The FAA AIM lists UP as unknown precipitation, with the words "automated stations only" in brackets.

The code says nothing about the amount or the phase of the water. UP can hide light drizzle, wet snow or a mix the sensor could not resolve. A pilot reading UP should treat it as "precipitation of some kind" and look for other clues in the report.

What an automated station can report

FMH-1 Table 8-5 lists the present weather that automated stations may report. For precipitation the list is short: DZ, RA, SN and UP may be reported. For obscurations, BR, FG and HZ may be reported. Everything outside those lists, such as hail, ice pellets or snow grains, has to come from a human observer or from an augmentation system.

This is why UP exists. A sensor that knows only four answers for precipitation (drizzle, rain, snow, or unknown) needs a fallback when the signal does not match any of the first three. The types of automated station are explained on the AO1 and AO2 page, and the report types on the AUTO and NIL pages of this site.

No intensity in US reports, one in UK reports

The sources disagree on whether UP takes a sign. FMH-1 states that intensity is coded with all precipitation types except ice crystals, hail and unknown precipitation. A US METAR therefore shows UP, never -UP or +UP.

CAP 746 (section 4.155) takes a different line for UK automated reports. It allows UP or FZUP "together with intensity qualifications... as appropriate". A UK AUTO METAR could therefore contain -UP or FZUP. The rule that applies depends on the country of the station, and the general rules for signs are on the intensity and vicinity page.

CAP 746 also restricts the shower descriptor in automated reports: SH is not used unless convective cloud is determined. An automated station that cannot identify a type of precipitation is also not in a position to call it a shower without cloud information.

FZUP and freezing conditions

FZUP is a UK form. CAP 746 lists it in its automated present weather rules, and its recent weather list gives REFZUP. It means that the station detected precipitation of unknown type at a temperature at which it would freeze on contact. The freezing descriptor and its risks are explained on the FZ freezing page.

FMH-1 allows FZ only with FG, DZ and RA, so FZUP is not a valid US code.

UP is not a forecast code

A TAF predicts what will happen, and an unknown type has no meaning in a forecast. The FAA AIM states that the TAF uses the same weather codes as the METAR "except UP". NWS Instruction 10-813 says the same: UP is not used in NWS-prepared terminal forecasts. A TAF that contained UP would be an error.

UP, missing data and PWINO

Three situations look alike in a report and mean different things:

  1. UP. The sensor works, detected precipitation and could not identify the type.
  2. // in the weather group. CAP 746 (section 4.154) states that when the present weather sensor is unserviceable, the group is shown as //. WMO-No. 782 uses RE// when recent weather is missing.
  3. PWINO. FMH-1 codes the remark PWINO when the present weather identifier is not operating. The FAA AIM lists it with the other sensor status indicators.

In the second and third cases the report says nothing reliable about present weather, even if it is raining heavily. The maintenance and sensor status page lists the other indicators, and the remarks page explains where they appear.

Recent unknown precipitation

WMO-No. 782 lists REUP for unknown precipitation that occurred since the previous report but not at the time of observation. CAP 746 gives REUP, RETSUP and REFZUP in its recent weather table: unknown precipitation, unknown precipitation with a thunderstorm, and freezing unknown precipitation. The RE group is explained on the recent weather page.

A schematic report

A schematic US line shows UP at an automated station:

METAR KXYZ 190755Z AUTO 03008KT 4SM UP BR OVC007 01/00 A3001 RMK AO2

It reads: automated report, wind from 030 degrees at 8 knots, visibility 4 statute miles, precipitation of unknown type and mist, overcast at 700 feet, temperature 1 °C, dew point 0 °C, station with a precipitation discriminator. With a temperature just above freezing, UP here could be rain, snow or a mix; the report does not say.

In real reports

The "In real reports" box on this page shows the share of METARs in the NOAA Aviation Weather Center sample collected for this site that contain UP. UP depends on automated stations and on precipitation near the boundary between types, so its share changes with the season and with the number of automated stations in the sample.

Method and limits

Definitions and rules are taken from FMH-1 (2019, sections 8.3.1, 8.5, Table 8-5, 12.6.8 and 12.7.1), WMO-No. 782 (2025 edition, present weather notes and recent weather), CAP 746 (sections 4.153 to 4.155 and the recent weather table), NWS Instruction 10-813 (October 2024, Appendix B) and the FAA AIM, chapter 7, section 1. The sources disagree on one point, stated on the page: FMH-1 gives UP no intensity, while CAP 746 allows intensity with UP and FZUP. The KXYZ line is a schematic example built from the coding rules, not a real report. The image shows a present weather sensor of the type used by the US Automated Surface Observing System; it does not show a report of UP. The box counts UP in the text of the METARs; mixed groups and recent weather may be included depending on how the statistic key counts them.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does UP mean in a METAR?

UP means unknown precipitation. FMH-1 states that it is reported when an automated station detects precipitation but its precipitation discriminator cannot recognise the type. A human observer never reports UP, because a person can see what is falling.

Can UP have an intensity sign?

The sources disagree. FMH-1 codes intensity for all precipitation types except ice crystals, hail and unknown precipitation, so US reports show UP alone. CAP 746 allows UP or FZUP together with intensity qualifications as appropriate, so -UP is possible in UK automated reports.

Why is UP never found in a TAF?

A forecaster predicts a precipitation type, so an unknown type makes no sense in a forecast. The FAA AIM states that TAFs use the same weather codes as METAR except UP, and NWS Instruction 10-813 states that UP is not used in NWS terminal forecasts.

What is the difference between UP and PWINO?

UP means the sensor works and has detected precipitation but cannot identify its type. PWINO is a US remark meaning the present weather identifier is not operating at all, so the report may say nothing about present weather even when something is falling.

What does REUP mean?

REUP is recent unknown precipitation: an automated station detected precipitation of unknown type during the period since the previous report, but not at the time of observation. WMO-No. 782 lists it, and CAP 746 also gives RETSUP and REFZUP.

Sources

  1. World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
  2. UK Civil Aviation Authority (2023). CAP 746, Requirements for Meteorological Observations at Aerodromes
  3. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1, Surface Weather Observations and Reports (FCM-H1-2019)
  4. National Weather Service (2024). NWS Instruction 10-813, Terminal Aerodrome Forecasts (October 30, 2024), Appendix B
  5. Federal Aviation Administration. Aeronautical Information Manual, chapter 7, section 1