TREND forecast in a METAR: NOSIG, BECMG and TEMPO with FM, TL and AT

Tafrob editorial team · Updated · 5 min read

Short answer

A TREND is a short landing forecast appended to a METAR or SPECI. It is valid for 2 hours from the report time and lists only the significant changes expected in wind, visibility, weather or cloud. NOSIG means no significant change is expected. BECMG describes a change, TEMPO a temporary fluctuation, with FM, TL or AT giving the times.

Key points

  • A TREND forecast is valid for 2 hours from the time of the METAR or SPECI it is attached to.
  • NOSIG means no significant change is expected and replaces the change groups entirely.
  • BECMG is a change that reaches or passes specified values, and TEMPO is a fluctuation lasting under 1 hour each time and under half of the period in total.
  • FM means from, TL means until and AT means at, and all times are UTC.
  • FMH-1, which defines the US METAR, has no TREND group, and PROB is never used in a TREND.
Dark storm clouds and a rainbow over Glasgow Airport
Photo: Thomas Nugent, CC BY-SA 2.0, via Wikimedia Commons

What is a TREND forecast?

A TREND forecast is a short statement of expected significant changes at the aerodrome, added at the end of a METAR or SPECI. WMO-No. 782 describes it as a concise statement appended to a routine or special report. Its period of validity is 2 hours from the time of the report, and the report itself forms an integral part of the forecast. It looks at four elements only: surface wind, prevailing visibility, weather and cloud.

CAP 746 puts it the same way for the UK. It calls the TREND a short period forecast, predicting significant weather changes likely to occur at the aerodrome in the two hours following the observation.

Not every ICAO METAR has one. CAP 746 says plainly that not all UK METARs include a TREND forecast. For the rest of the report, see how to read a METAR.

NOSIG: no significant change

NOSIG is the simplest TREND. WMO-No. 782 says that when no significant change is expected during the TREND period, the change indicator groups are omitted and the abbreviation NOSIG is used instead. CAP 746 lists NOSIG as meaning that no significant changes are forecast.

So a report ending in NOSIG tells you the conditions in the METAR are expected to hold for the next 2 hours, within the criteria the aerodrome uses to define a significant change.

BECMG: a change

BECMG is used for expected changes that reach or pass specified values at a regular or irregular rate. WMO-No. 782 gives the change time with FM (from), TL (until) or AT (at):

Form Meaning
BECMG FM1030 TL1130 change begins at 1030 and ends at 1130, inside the TREND period
BECMG TL1100 3000 BR change starts at the start of the period and ends by 1100, to 3000 m visibility in mist
BECMG FM1100 change begins at 1100 and is complete by the end of the period
BECMG AT1100 change occurs at 1100
BECMG no time group: change expected within the period, time uncertain

CAP 746 has similar examples. BECMG 0500 SN VV/// means conditions become 500 m in moderate snow with the sky obscured. With no time stated, the change must be expected to start at the beginning of the TREND period and finish by its end, which is within 2 hours. BECMG AT 1800 9000 NSW means visibility becomes 9000 m and the present weather in the METAR ceases at 1800 UTC. Note that CAP 746 prints a space in AT 1800, while WMO-No. 782 writes AT1100 without one.

NSW stands for no significant weather. CAP 746 says it may be used in a TREND to show that weather present in the observation is expected to stop. See NSW for the TAF version.

TEMPO: a temporary fluctuation

TEMPO describes temporary fluctuations that reach or pass specified values. WMO-No. 782 limits them to less than 1 hour in each instance and, in total, to less than half of the forecast period during which they are expected. The same FM and TL words give the timing.

  • TEMPO FM1030 TL1130: fluctuations begin and end inside a period from 1000 to 1200 UTC.
  • TEMPO FM1030: fluctuations begin at 1030 and continue throughout the rest of the period.
  • TEMPO alone: the fluctuations start at the beginning of the period and continue throughout the rest of it.

CAP 746 gives a wind example: TEMPO 25035G50KT means temporary fluctuations to 250 degrees true, a ten-minute mean of 35 knots, with gusts to 50 knots.

For the same words in a TAF, where they work over a longer period and with different timing rules, see BECMG in a TAF and TEMPO in a TAF, and the comparison in TEMPO versus BECMG versus FM.

What goes in a TREND, and what does not

After the change indicator, only the elements that are expected to change significantly are listed. There is one exception: for cloud, WMO-No. 782 says that if a significant change is expected, all cloud groups are given, including any significant layers not expected to change.

Other rules from the sources:

  • Units and scales are the same as in the report the TREND is attached to.
  • The PROB indicator is never used in a TREND, so PROB30 and PROB40 do not appear (see PROB30 and PROB40 in a TAF for where they do).
  • Midnight is written 0000 with FM and AT, and 2400 with TL.
  • WMO-No. 782 says differences of 30 minutes between forecast and actual times are statistically common.

Why the US report has no TREND

The FMH-1 handbook, which sets the rules for US METAR and SPECI, contains no TREND or NOSIG group; searching the text returns no mention of either word. None of the sources opened for this page states why the US format has no TREND, so this page only says the group is absent from FMH-1. The text of the FAA Aviation Weather Handbook and the NAV CANADA guide opened for this page does not describe a TREND forecast group either.

If you are comparing the two systems, TREND belongs to the ICAO format, and the comparison table in US versus ICAO METAR differences is the place to look. A TAF is a separate forecast; see TAF versus METAR.

Reading a TREND step by step

  1. Find the report time in the METAR. The TREND runs for 2 hours from that time.
  2. Check whether the TREND is NOSIG. If it is, nothing else follows and no significant change is expected.
  3. If not, read the change indicator: BECMG for a change that reaches or passes specified values, TEMPO for a temporary fluctuation.
  4. Read any FM, TL or AT time group and place it inside the 2 hour period.
  5. Read the changed elements only. Remember that for cloud all groups are repeated when a change is expected.

Common mistakes

  • Reading BECMG or TEMPO in a METAR as a TAF group. In a TREND the validity is 2 hours from the report.
  • Treating TEMPO as a lasting change. WMO-No. 782 limits it to under 1 hour at a time.
  • Looking for PROB30 in a TREND. It is not allowed there.
  • Reading NOSIG as a guarantee of calm weather. It means no change that crosses the aerodrome's significance criteria.

This page is educational and is not a source for operational weather.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does NOSIG mean at the end of a METAR?

NOSIG means no significant change is expected. WMO-No. 782 says that when nothing significant is expected during the TREND period the change groups are left out and NOSIG is used instead. It covers the 2 hours after the observation and refers to wind, visibility, weather and cloud only.

How long is a TREND forecast valid?

Two hours from the time of the report, according to WMO-No. 782. CAP 746 gives the same period for the UK and says the TREND predicts significant weather changes likely at the aerodrome in the two hours after the observation. The METAR itself forms an integral part of the forecast.

What is the difference between BECMG and TEMPO in a TREND?

BECMG describes expected changes that reach or pass specified values, at a regular or irregular rate. TEMPO describes temporary fluctuations that last less than 1 hour each time and, in total, less than half of the period in which they are forecast. After TEMPO the earlier conditions are expected to return.

Do US METARs have a TREND?

No TREND group appears in the US METAR format described by FMH-1, and the document does not contain the words TREND or NOSIG. Countries that follow the ICAO format append it to some reports. CAP 746 notes that even in the UK not all METARs include a TREND forecast.

Sources

  1. World Meteorological Organization (2025). Aerodrome Reports and Forecasts, A Users' Handbook to the Codes (WMO-No. 782)
  2. UK Civil Aviation Authority (2023). CAP 746, Requirements for Meteorological Observations at Aerodromes
  3. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1 (FCM-H1-2019)
  4. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A)
  5. NAV CANADA. Aviation Weather Services Guide