Flight categories: VFR, MVFR, IFR and LIFR

Tafrob editorial team · Updated · 6 min read

Short answer

Flight categories sort a station's weather into four classes from its ceiling and visibility. LIFR is a ceiling below 500 feet or visibility below 1 statute mile, IFR below 1,000 feet or 3 miles, MVFR 1,000 to 3,000 feet or 3 to 5 miles, and VFR above 3,000 feet and 5 miles. The worse of the two values decides. They are a US situational awareness tool, not legal minimums.

Runs in your browser. Training and planning aid only, not for operational use.

Key points

  • LIFR (purple): ceiling below 500 feet and/or visibility below 1 statute mile.
  • IFR (red): ceiling 500 to below 1,000 feet and/or visibility 1 to below 3 miles.
  • MVFR (blue): ceiling 1,000 to 3,000 feet and/or visibility 3 to 5 miles.
  • VFR (green): ceiling above 3,000 feet and visibility above 5 miles.
  • The worse of ceiling and visibility sets the category.
  • The FAA states they are for situational awareness only, not the VFR minimums of 14 CFR 91.155.
Runway lights shining through dense fog at night
Photo: shankar s. from Dubai, united arab emirates, CC BY 2.0, via Wikimedia Commons

Dataset: 121,001 METARs from 5,526 stations and 12,960 TAFs, NOAA Aviation Weather Center, 18 November 2026 to 19 November 2026. Generated 2026-11-19.

Flight category of reports (as computed by NOAA)
CategoryShareReports
VFR70.1%84,798
MVFR13.4%16,245
IFR6.4%7,691
LIFR3.8%4,643

Four classes from two numbers

Weather maps of METAR stations often show a coloured dot for each airport. The colour is the flight category, a single label computed from two values in the report: the ceiling and the visibility. It gives a fast picture of where visual flight is easy, marginal or not possible, without reading every report.

Code Meaning
VFR Ceiling above 3,000 ft and visibility above 5 SM (green)
MVFR Ceiling 1,000 to 3,000 ft and/or visibility 3 to 5 SM (blue)
IFR Ceiling 500 to below 1,000 ft and/or visibility 1 to below 3 SM (red)
LIFR Ceiling below 500 ft and/or visibility below 1 SM (purple)

The thresholds

The FAA Aviation Weather Handbook (section 3.4.2) gives the definitions and the colours:

  • LIFR, low instrument flight rules: ceiling below 500 feet and/or visibility below 1 statute mile; purple.
  • IFR, instrument flight rules: ceiling 500 feet to below 1,000 feet and/or visibility 1 mile to below 3 miles; red.
  • MVFR, marginal visual flight rules: ceiling 1,000 to 3,000 feet and/or visibility 3 to 5 miles; blue.
  • VFR, visual flight rules: ceiling greater than 3,000 feet and visibility greater than 5 miles; green.

"And/or" is the key. Each value is placed in a class on its own, and the station takes the worse of the two. A report with a ceiling of 4,000 feet and a visibility of 2 miles is IFR because of the visibility; a report with 10 miles and a ceiling of 800 feet is IFR because of the ceiling. A station with no ceiling at all, only FEW or SCT cloud, is classed by its visibility alone.

Where the ceiling comes from

The category uses the ceiling, not the lowest cloud. That means the lowest layer reported as BKN or OVC, or a vertical visibility. A report with SCT004 and 10 miles of visibility is VFR, even though cloud sits 400 feet above the runway. The rule is explained on the ceiling page, and the vertical visibility case on the vertical visibility page.

Visibility is the prevailing visibility of the report, in statute miles in the United States. Reports in metres must be converted before the thresholds can be applied: 5 statute miles is about 8 km, 3 miles about 4.8 km and 1 mile about 1.6 km. The visibility group is explained on the visibility page.

The categories look like flight rules, but they are not. The FAA Aviation Weather Handbook states that weather flight categories are "not to be confused with the basic VFR weather minimums given in 14 CFR 91.155", and that they "are only intended for situational awareness". It adds that "there are no 14 CFR part 91 MVFR weather minimums".

In practice the gap can be large in both directions. The legal VFR minimums depend on the class of airspace and on altitude, and in some uncontrolled airspace they are far lower than the MVFR or IFR thresholds. A station shown as IFR on a map may still allow legal VFR flight in some airspace, and a station shown as VFR may still have a scattered layer that makes the planned route impossible. The category is a warning light, not a decision.

How the categories are used

The categories appear in several US products:

  • METAR maps, where each station is coloured by its category;
  • TAF displays, where each forecast period can be classed the same way, as discussed on the TAF flight planning page;
  • AIRMET Sierra, which the Handbook describes as covering IFR conditions, ceilings below 1,000 feet and/or visibility below 3 miles, over wide areas.

The thresholds also echo planning figures. The ceiling of 1,000 feet and the visibility of 3 miles match common basic VFR values in controlled airspace near airports, and the US alternate rule in 14 CFR 91.169 uses 2,000 feet and 3 miles. That is why the IFR line falls where it does, even though the category itself has no legal force.

Canada and the rest of the world

Transport Canada uses similar criteria for the IFR outlook of its graphic area forecast (TC AIM, Table 4.3): IFR below 1,000 feet AGL and/or below 3 statute miles, MVFR from 1,000 to 3,000 feet and/or 3 to 5 miles, VFR above 3,000 feet and above 5 miles. The TC AIM notes that only IFR conditions are included in the IFR outlook, that MVFR is defined in the table for reference only, and that NIL SIG WX is written when no organized IFR is expected.

ICAO and the European Union have no flight categories. The EU rules of the air (SERA.5001) define visual meteorological condition minimums by airspace class and altitude, and SERA uses a ceiling of 1,500 feet for VFR in a control zone and 600 feet for special VFR. Coloured category dots on maps of Europe come from applying the US thresholds to European METARs, not from European rules. The broader differences between US and ICAO practice are listed on the US and ICAO differences page.

Edge cases

A few situations need care:

  • A ceiling of exactly 3,000 feet is MVFR, not VFR: VFR needs more than 3,000 feet.
  • A visibility of exactly 5 miles is MVFR; VFR needs more than 5 miles.
  • CAVOK, used outside the United States, has no ceiling below 5,000 feet and a visibility of at least 10 km, so it always gives VFR.
  • A missing visibility or cloud group makes the category uncertain, and some displays then leave the station uncoloured.

A schematic report

METAR LXXX 190750Z 24010KT 4SM BR FEW008 BKN022 OVC045 12/10 A2998

It reads: visibility 4 statute miles in mist, few clouds at 800 feet, broken at 2,200 feet, overcast at 4,500 feet. The ceiling is 2,200 feet, which is MVFR, and the visibility of 4 miles is also MVFR. The station is MVFR, shown in blue. The FEW layer at 800 feet does not count.

The calculator on this page applies the same thresholds to a ceiling and a visibility entered by hand.

In real reports

The "In real reports" box on this page shows the share of METARs in the NOAA Aviation Weather Center sample collected for this site in each category, as computed by NOAA. Most stations are in the United States, and VFR usually dominates; the shares of IFR and LIFR rise at night and in the early morning, when fog and low stratus form.

Method and limits

The thresholds, colours and the situational awareness warning are taken from the FAA Aviation Weather Handbook (FAA-H-8083-28A, section 3.4.2 and the AIRMET section). The Canadian criteria come from the TC AIM, MET section, Table 4.3, and the European rules from Regulation (EU) No 923/2012 (SERA.5001 and the control zone rules). The 14 CFR 91.169 figures apply to aeroplanes. The metric conversions are rounded. The LXXX line is a schematic example, not a real report. The image shows runway lights in fog; it is not linked to a specific report. The box uses the flight category field computed by NOAA, not a value recomputed for this site.

Source code of this tool (MIT)
// Tafrob calculators - pure functions, MIT licence (c) Tafrob.
// Every formula is documented on the tool page with its source.

const rad = (d: number) => (d * Math.PI) / 180;

/** Wind components on a runway. dir/heading in degrees (same reference: both true or both magnetic). */
export function windComponents(windDir: number, speed: number, runwayHeading: number) {
  const angle = ((windDir - runwayHeading + 540) % 360) - 180; // -180..180, + = from the right
  const cross = speed * Math.sin(rad(angle));
  const head = speed * Math.cos(rad(angle));
  return { angle, cross, head }; // cross > 0: from the right; head < 0: tailwind
}

/** Saturation vapour pressure (hPa), Magnus formula with Alduchov & Eskridge (1996) coefficients. */
export const satVap = (tC: number) => 6.1094 * Math.exp((17.625 * tC) / (tC + 243.04));

/** Relative humidity (%) from temperature and dew point (deg C). */
export const relHumidity = (tC: number, tdC: number) => (100 * satVap(tdC)) / satVap(tC);

/** Dew point (deg C) from temperature (deg C) and relative humidity (%). */
export function dewPoint(tC: number, rh: number) {
  const g = Math.log(rh / 100) + (17.625 * tC) / (243.04 + tC);
  return (243.04 * g) / (17.625 - g);
}

/** Convective cloud base estimate above ground (ft) from the temperature/dew point spread (deg C). */
export const cloudBaseFt = (tC: number, tdC: number) => ((tC - tdC) / 2.5) * 1000;

/** Pressure altitude (ft) from field elevation (ft) and altimeter setting (inHg). FAA rule: 1,000 ft per inHg. */
export const pressureAltitude = (elevFt: number, altInHg: number) => elevFt + (29.92 - altInHg) * 1000;

/** ISA temperature (deg C) at a pressure altitude (ft). */
export const isaTemp = (paFt: number) => 15 - (1.98 * paFt) / 1000;

/** Station pressure (inHg) from altimeter setting (inHg) and elevation (m), NWS formula. */
export const stationPressure = (altInHg: number, elevM: number) => altInHg * Math.pow((288 - 0.0065 * elevM) / 288, 5.2561);

/**
 * Density altitude (ft), NWS method (WFO El Paso): station pressure and virtual temperature (humidity included).
 * e = 6.11 * 10^(7.5 * Td / (237.3 + Td)) hPa; DA = 145366 * (1 - (17.326 * P / Tv)^0.235), P in inHg, Tv in degrees Rankine.
 * Same constants as the NWS page, so results can be checked against it (a dry ISA sea level case gives about 18 ft, not 0).
 */
export function densityAltitude(elevFt: number, altInHg: number, tC: number, tdC?: number) {
  const p = stationPressure(altInHg, elevFt * 0.3048); // inHg
  const pHpa = p * 33.8639;
  const e = tdC === undefined ? 0 : 6.11 * Math.pow(10, (7.5 * tdC) / (237.3 + tdC)); // NWS vapour pressure
  const tK = tC + 273.15;
  const tvK = tK / (1 - (e / pHpa) * (1 - 0.622));
  const tvR = tvK * 1.8;
  const da = 145366 * (1 - Math.pow((17.326 * p) / tvR, 0.235));
  const pa = pressureAltitude(elevFt, altInHg);
  const thumb = pa + 120 * (tC - isaTemp(pa)); // rule of thumb: 120 ft per deg C above ISA
  return { da, pa, thumb, isa: isaTemp(pa), stationInHg: p };
}

/** Pressure conversions. */
export const HPA_PER_INHG = 33.8639;
export const HPA_PER_MMHG = 1.333224;
export const hpaToInhg = (h: number) => h / HPA_PER_INHG;
export const inhgToHpa = (i: number) => i * HPA_PER_INHG;
/** METAR A group: hundredths of inHg rounded down (FMH-1 11.5.1); the epsilon absorbs float error (29.92 -> 2991.9999...). */
export const aGroup = (hpa: number) => 'A' + String(Math.floor(hpaToInhg(hpa) * 100 + 1e-6)).padStart(4, '0');
/** Pressure altitude offset (ft) from 1013.25 hPa with the AIM rule of 1,000 ft per inHg (about 29.5 ft per hPa). */
export const pressureOffsetFt = (hpa: number) => ((1013.25 - hpa) / HPA_PER_INHG) * 1000;

export type Category = 'VFR' | 'MVFR' | 'IFR' | 'LIFR';
/** US flight category (NWS / Aviation Weather Center definitions). ceiling in ft AGL (Infinity if none), visibility in statute miles. */
export function flightCategory(ceilingFt: number, visSm: number): { cat: Category; byCeiling: Category; byVis: Category } {
  const c: Category = ceilingFt < 500 ? 'LIFR' : ceilingFt < 1000 ? 'IFR' : ceilingFt <= 3000 ? 'MVFR' : 'VFR';
  const v: Category = visSm < 1 ? 'LIFR' : visSm < 3 ? 'IFR' : visSm <= 5 ? 'MVFR' : 'VFR';
  const rank: Category[] = ['LIFR', 'IFR', 'MVFR', 'VFR'];
  const cat = rank[Math.min(rank.indexOf(c), rank.indexOf(v))];
  return { cat, byCeiling: c, byVis: v };
}

/** Speed conversions (from knots). */
export const KT = { mps: 0.514444, kmh: 1.852, mph: 1.150779 };

/** Interpret a METAR/TAF day-time group DDHHMMZ relative to a reference date (UTC). */
export function dayTimeGroup(group: string, ref = new Date()) {
  const m = group.trim().toUpperCase().match(/^(\d{2})(\d{2})(\d{2})Z?$/);
  if (!m) return null;
  const [d, h, mi] = [Number(m[1]), Number(m[2]), Number(m[3])];
  if (d < 1 || d > 31 || h > 23 || mi > 59) return null;
  // Choose the month that puts the date closest to the reference date.
  let best: Date | null = null;
  for (const off of [-1, 0, 1]) {
    const c = new Date(Date.UTC(ref.getUTCFullYear(), ref.getUTCMonth() + off, d, h, mi));
    if (c.getUTCDate() !== d) continue;
    if (!best || Math.abs(+c - +ref) < Math.abs(+best - +ref)) best = c;
  }
  return best;
}

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What are the flight category thresholds?

The FAA Aviation Weather Handbook gives LIFR for a ceiling below 500 feet or visibility below 1 statute mile, IFR for 500 to below 1,000 feet or 1 to below 3 miles, MVFR for 1,000 to 3,000 feet or 3 to 5 miles, and VFR above 3,000 feet and 5 miles.

What do the colours on a METAR map mean?

They are the flight categories. The FAA Aviation Weather Handbook uses purple for LIFR, red for IFR, blue for MVFR and green for VFR. A green dot means good conditions, a purple one means very low ceiling or visibility.

Is MVFR a legal category?

No. The FAA Aviation Weather Handbook states that there are no 14 CFR part 91 MVFR weather minimums. MVFR is a planning label that warns of conditions close to the limits of comfortable visual flight.

Can I fly VFR when the category is IFR?

The category does not decide it. The legal VFR minimums are in 14 CFR 91.155 and depend on the airspace class and altitude. The FAA states that flight categories are only intended for situational awareness and must not be confused with those minimums.

Are flight categories used outside the United States?

They are a US convention. ICAO and the EU use visual and instrument meteorological conditions defined in the rules of the air. Transport Canada uses similar IFR, MVFR and VFR criteria in its graphic area forecasts, mainly to show IFR areas.

Sources

  1. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A)
  2. Transport Canada (2025). TC AIM, MET section
  3. European Union, EUR-Lex (2012). Commission Implementing Regulation (EU) No 923/2012 (SERA)
  4. Federal Aviation Administration. Aeronautical Information Manual, chapter 7, section 1