SIGMET: how to read the en route hazard warning

Tafrob editorial team · Updated · 7 min read

Short answer

A SIGMET is a short warning of hazardous en route weather such as severe turbulence, severe icing, thunderstorms, volcanic ash or a tropical cyclone. It is unscheduled and valid up to 4 hours, or 6 hours for volcanic ash and tropical cyclones. It is replaced by a new number, never amended. The US issues convective SIGMETs separately.

Key points

  • A SIGMET warns of significant en route hazards for all aircraft and is unscheduled.
  • ICAO validity: up to 4 hours, or 6 hours for volcanic ash (WV) and tropical cyclones (WC).
  • Phenomena include TS, SEV TURB, SEV ICE, dust or sandstorm, volcanic ash and tropical cyclone.
  • A SIGMET is never amended: the next number in the series replaces it.
  • US domestic SIGMETs cover non-convective hazards only; convective ones are a separate product.
  • International SIGMETs give positions in latitude and longitude with OBS or FCST.
Ice accumulated on the upper surface of an Airbus A320 wing
Photo: Olivier Cleynen, CC BY-SA 4.0, via Wikimedia Commons

What a SIGMET is

A SIGMET is a short warning about a weather hazard that can affect the safety of aircraft in flight, issued as soon as it is practical once the hazard is observed or expected. The FAA Aeronautical Information Manual (AIM) defines it as a concise description of the occurrence or expected occurrence of specified en route weather phenomena. NWSI 10-811, the National Weather Service directive that governs US advisories, says it is intended for all pilots in flight.

A SIGMET is issued by the responsible Meteorological Watch Office (MWO) for a flight information region (FIR). It is not a forecast of routine weather. It is an unscheduled alert that appears only when a defined hazard is present, and it stays short on purpose. Hazards of lower intensity belong to the AIRMET, while the US also splits out thunderstorm hazards into the convective SIGMET.

Phenomena that trigger a SIGMET

The phenomena depend on the issuing system, and the US domestic list is shorter than the international one. NWSI 10-811 lists them as follows.

Phenomenon Abbreviation US domestic (non-convective) International
Severe or greater turbulence SEV TURB Yes Yes
Severe icing SEV ICE Yes Yes, also SEV ICE (FZRA)
Dust storm WDSPR DS Yes Yes
Sandstorm WDSPR SS Yes Yes
Volcanic ash VA Yes Yes
Obscured, embedded, widespread or isolated severe thunderstorms, squall line OBSC TS, EMBD TS, WDSPR TS, ISOL SEV TS, SQL TS No, handled by convective SIGMET Yes
Tropical cyclone TC No Yes

For international SIGMETs the NWSI notes that tornado (TDO), funnel cloud (FC), waterspout (WTSPT) and heavy hail (HVY GR) may be added to describe a thunderstorm. A thunderstorm described there is explained on the thunderstorm code page, and volcanic ash on the VA page. The domestic dust and sand criteria connect to the dust and sandstorm page. NWSI 10-811 (2025) also added IFR criteria for dust and sand SIGMETs, as its summary of revisions records.

Validity, reissue and cancellation

A SIGMET is valid for a short, fixed period and is never extended in place. The ICAO Asia and Pacific SIGMET guide, section 3.5.2.3, says a SIGMET for non-volcanic, non-cyclone phenomena should be valid no more than 4 hours, and a SIGMET for volcanic ash or a tropical cyclone no more than 6 hours. NWSI 10-811 applies the same limits: up to 4 hours, with the longer period for VA and TC. The AIM says the same.

  • Continuing phenomena are reissued at least every 4 hours (6 hours for VA and TC in the international system).
  • Amendments are not issued. The next SIGMET in the series is issued instead, and its valid time is reset to a new 4 hour period.
  • A SIGMET is canceled when the phenomenon is no longer occurring or expected, or in the US domestic case when it has moved out of the area of responsibility.
  • Corrections are made with a new SIGMET carrying the next number, which supersedes the earlier one.

Series names and numbers

Each SIGMET carries a series name and a number that rises with each reissue. US offices share the phonetic alphabet to keep valid series distinct. NWSI 10-811 gives these ranges.

Office or area Series names
Aviation Weather Center, Pacific ALFA to HOTEL
Aviation Weather Center, Atlantic ALFA to MIKE
Alaska Aviation Weather Unit INDIA to MIKE
WFO Honolulu NOVEMBER to ZULU

The domestic CONUS SIGMETs in the AIM use designators from November through Yankee, excluding Sierra and Tango.

ICAO and US formats compared

The same hazard is written in two distinct ways depending on where it is issued. The domestic US text locates the hazard with state abbreviations and VOR coordinates, while international SIGMETs use FIR names and latitude and longitude. NWSI 10-811 gives the order of elements for each.

Element US domestic SIGMET International SIGMET
Identification Series name and number FIR indicator, series name and number
Validity Beginning and ending UTC, as VALID UNTIL Group ddhhmm/ddhhmm
Area States, then VOR coordinates FIR name, then latitude and longitude points
Phenomenon SEV TURB, SEV ICE, DS, SS, VA The longer list above
Observed or forecast Not stated OBS or FCST with time in UTC
Movement If appropriate MOV with 16 compass points and speed in knots, or stationary
Intensity change Not in domestic FIRs INTSF, WKN or NC
Continuation Whether it continues in the 4 hours beyond Not part of the text

The wider differences between US and ICAO reports are discussed on the US versus ICAO differences page.

Reading a US domestic SIGMET

This is the CONUS example printed in NWSI 10-811.

WSUS01 KKCI 050600
WS1R
BOSR WS 050600
SIGMET ROMEO 2 VALID UNTIL 051000 ME NH VT
FROM CAR TO YSJ TO CON TO MPV TO CAR
SEV TURB BLW 080. RPRTD BY ACFT. CONDS CONTG BYD 1000Z.

It reads: this is the second SIGMET of the ROMEO series, valid until 1000 UTC on day 05, for Maine, New Hampshire and Vermont. The affected area is the polygon from the Caribou VOR (CAR) to YSJ, CON, MPV and back to CAR. Severe turbulence is present below 8,000 feet, was reported by an aircraft, and conditions are expected to continue beyond 1000 UTC. The first lines are the bulletin header (WSUS01 KKCI, day 05 and 0600 UTC) and the product line (BOSR WS).

Reading an international SIGMET

This is the Oakland Oceanic example printed in NWSI 10-811.

WSPA07 PHFO 010358
KZAK SIGMET TANGO 1 VALID 010400/010800 PHFO-
OAKLAND OCEANIC FIR EMBD TS OBS WI N2055 W15000 - N1950 W14945 - N1922 W15130 - N2027 W15048 - N2055 W15000. TOP FL400. MOV W 10KT. WKN.

It reads: TANGO 1 for the Oakland Oceanic FIR (KZAK), valid from 0400 to 0800 UTC on day 01 and issued by PHFO (Honolulu). Embedded thunderstorms are observed within the polygon whose corner points are given as latitude and longitude, with tops to flight level 400, moving west at 10 knots and weakening. The polygon closes by repeating its first point.

Tropical cyclone and volcanic ash SIGMETs

Two phenomena get their own rules because their SIGMETs run six hours and carry a forecast position. For a tropical cyclone, NWSI 10-811 requires a non-frontal, synoptic-scale system over tropical or subtropical waters with organized convection and a defined cyclonic circulation, and winds reaching 35 knots. The SIGMET gives two positions: the advisory position at the start and the forecast position at the end of the period.

WSNT03 KKCI 081451 SIGA0C
KZNY SIGMET CHARLIE 11 VALID 081500/082100 KKCI-
NEW YORK OCEANIC FIR TC KYLE OBS N3106 W07118 AT 1500Z TOP FL500 WI
120NM OF CENTER MOV WSW 5 KT NC FCST 2100Z TC CENTER N3142 W07012

It reads: tropical cyclone Kyle, observed at 1500 UTC at 31.1 N and 71.3 W, with convection tops at flight level 500 within 120 nautical miles of the center, moving west-southwest at 5 knots with no change, and forecast to be centered near 31.7 N and 70.2 W at 2100 UTC. A volcanic ash SIGMET follows the same pattern, with the eruption, the observed ash cloud, a surface to flight level layer, movement and a forecast cloud position at the end of the validity. NWSI 10-811 says volcanic ash SIGMETs are issued for any eruption that produces ash emissions, regardless of its size, and draw their forecast positions from the Volcanic Ash Advisory Center advisory.

Using a SIGMET

A SIGMET is a hazard alert to read against the route, not a go or no-go decision on its own. A pilot should compare the polygon and the vertical extent with the planned route and altitude, check the valid time, and look for a later SIGMET in the same series. The AIRMET page covers the lower intensity advisories that accompany them, and the GAMET page covers the European low-level forecast that omits hazards already covered by a SIGMET.

Method and limits

The US rules, phenomena, formats, series names and the four real examples come from NWSI 10-811 dated September 2, 2025, supported by the AIM. The 4 and 6 hour ICAO limits come from section 3.5.2.3 of the ICAO Asia and Pacific SIGMET guide (12th edition, November 2025), which is a regional guide and not Annex 3 itself. The current text of ICAO Annex 3 and WMO-No. 49 could not be read for this page; the only Annex 3 file read is a 2007 extract of the 16th edition, so ICAO details such as the full phenomena list, header codes and cancellation wording should be checked against the current Annex. The meaning of the date group in the header lines (day and time) is inferred from the matching valid times in the examples. The AIM text and NWSI 10-811 do not always agree in detail, for example on convective SIGMET criteria, which is covered on the convective SIGMET page. The image shows ice on an A320 wing and is only an illustration of one SIGMET phenomenon.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does SIGMET stand for?

SIGMET stands for Significant Meteorological Information. The FAA Aeronautical Information Manual describes it as a concise description of the occurrence or expected occurrence of specified en route weather phenomena that is expected to affect the safety of aircraft operations.

How long is a SIGMET valid?

The ICAO Asia and Pacific SIGMET guide says a SIGMET for non-volcanic, non-cyclone phenomena should be valid no more than 4 hours, and 6 hours for volcanic ash or tropical cyclones. NWSI 10-811 applies the same limits to US SIGMETs.

What is the difference between a SIGMET and an AIRMET?

An AIRMET covers hazards at intensities lower than those needing a SIGMET, such as moderate turbulence or moderate icing, and is aimed especially at VFR pilots. A SIGMET covers severe turbulence, severe icing, volcanic ash and similar higher intensity hazards for all aircraft.

Can a SIGMET be amended or corrected?

NWSI 10-811 states that SIGMET amendments are not issued. The next SIGMET in the series is issued instead, with a reset valid period. Corrections are made by issuing a new SIGMET with the next number that supersedes the previous one.

Why are US SIGMETs named with alphabet words?

Each US issuing office uses its own part of the phonetic alphabet. The Aviation Weather Center uses ALFA to HOTEL in the Pacific and ALFA to MIKE in the Atlantic, according to NWSI 10-811.

Sources

  1. National Weather Service (2025). NWS Instruction 10-811, Enroute and Terminal Aviation Forecasts and Advisories (September 2, 2025)
  2. Federal Aviation Administration (2025). Aeronautical Information Manual, Chapter 7, Section 1: Meteorology
  3. ICAO Asia and Pacific Office (2025). Asia/Pacific Regional SIGMET Guide, 12th edition
  4. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A), chapter on aviation weather advisories
  5. International Civil Aviation Organization (2007). Annex 3 to the Convention on International Civil Aviation, 16th edition, Amendment 74 extract