AO1 and AO2 in a METAR: the automated station type

Tafrob editorial team · Updated · 5 min read

Short answer

AO1 and AO2 are remarks in US METAR and SPECI reports from automated stations. AO1 identifies a station without a precipitation discriminator, and AO2 a station with one. The discriminator tells liquid, freezing and frozen precipitation apart. The code follows RMK, and when it is absent, the station is a manual one.

Key points

  • AO1 or AO2 is coded in all METAR and SPECI from automated stations, after RMK.
  • AO1 means no precipitation discriminator, AO2 means a precipitation discriminator is present.
  • The discriminator is a sensor or array of sensors that differentiates liquid, freezing and frozen precipitation.
  • JO 7900.5E says the absence of the remark indicates a manual station.
  • Where the discriminator cannot recognize the type, the automated station reports unknown precipitation, coded UP.
Present weather sensor of the ASOS at Ely Airport in Nevada
Photo: Famartin, CC BY-SA 3.0, via Wikimedia Commons

What do AO1 and AO2 mean?

AO1 and AO2 are two short remarks that tell you what kind of automated station produced a US METAR or SPECI. They are not weather. They sit in the remarks section, after RMK, and describe the equipment behind the report. The frequency box on this page shows how often each one appears in the dataset behind this site. For the order of the other groups, see how to read a METAR.

FMH-1 states the rule in one sentence: AO1 or AO2 shall be coded in all METAR and SPECI from automated stations. FAA Order JO 7900.5E, section 13.21, repeats it, and the Aviation Weather Handbook gives the same wording in its decoding section.

Code Station type
AO1 Automated station without a precipitation discriminator
AO2 Automated station with a precipitation discriminator

Both FMH-1 and JO 7900.5E list the same two abbreviations in their abbreviation tables.

What is a precipitation discriminator?

The handbooks define the discriminator in their glossaries. FMH-1 calls it a sensor, or array of sensors, that differentiates between different types of precipitation: liquid, freezing and frozen. So the distinction between AO1 and AO2 is about what the station can tell you about falling precipitation.

JO 7900.5E and FMH-1 also explain what happens when the discriminator cannot decide. Unknown precipitation is the type reported when the automated station detects precipitation but the discriminator cannot recognize the type, and it is coded UP. JO 7900.5E adds in its coding rules that, at automated stations, precipitation of unknown type is coded as UP when the discriminator cannot identify it with any greater precision. The UP page covers that code.

This page does not list which precipitation types an AO1 station can or cannot report. FMH-1 and JO 7900.5E define the two station types, but the sections on station type do not spell out the details of AO1 reporting.

Where it sits in the remarks

In the order set out by FMH-1, the station type is the third item among the automated, manual and plain language remarks. It comes after volcanic eruptions and after tornadic activity, and before the peak wind. JO 7900.5E puts the same sequence in its table: tornadic activity, then type of automated station, then peak wind. So in most automated reports, AO1 or AO2 is the first remark after RMK. The wider structure is on the METAR remarks page.

JO 7900.5E also says that the absence of the remark indicates a manual station. That makes the remark a quick test for the type of station a US report came from.

Real examples from the FAA order

JO 7900.5E prints examples of augmented and backup observations. These are quoted from the order, not invented here.

METAR KGLD 011755Z AUTO 21020G35KT 1SM +RA OVC010 27/24 A2991 RMK AO2 SLP101

This is an automated report from a station with a discriminator. AUTO is in the body, and the remarks begin with AO2 followed by the sea-level pressure SLP101.

METAR KHEF 011755Z 21020G35KT 1SM +TSRA OVC010CB 27/24 A2991 RMK AO1 WEA:TSRA OCNL LTGCG OHD TS OHD MOV E

Here the station is an AO1 station, and an observer has augmented the report. There is no AUTO in the body, and the remark list begins with AO1 and carries the observer's weather and thunderstorm remarks. The order uses this example to show an automated system without SPECI capability with augmentation.

METAR KIAD 011255Z AUTO 7SM 06/03 RMK AO2 SLP101 $

This one shows an AO2 station whose ceilometer and anemometer are not operational, with no backup observer on duty. The wind and sky groups are missing, and the dollar sign at the end is the maintenance indicator. See the maintenance indicator and sensor status page.

The Aviation Weather Handbook gives another use of the code in a decoded example:

KPNS 030053Z 36005KT 10SM CLR 30/23 A2992 RMK AO2 SLP132 T03000233

Reading the tail: AO2 is the station type, SLP132 is the sea-level pressure, covered on the SLP page, and T03000233 is the hourly temperature group.

AO1 and AUTO are different things

It is easy to merge AUTO and AO1 or AO2, but they answer different questions.

  • AUTO in the body says the report is fully automated, with no observer input. See AUTO, COR and NIL.
  • AO1 or AO2 in the remarks says what kind of automated equipment the station has.

The FAA order shows why they come apart. In its augmented examples, a report from an AO2 station can drop AUTO because an observer is adding information, but the AO2 stays, because it describes the station. In the backup examples, the same station that sends AUTO with all sensors working can send a report without AUTO when a backup observer adds the wind and sky groups. The logic is that AUTO describes how this report was made, and AO1 or AO2 describes the station.

Automated stations in the US

The two codes come from the way the US runs its automated observing systems. For the systems themselves, see the ASOS and AWOS page. JO 7900.5E labels its example reports by system, using terms such as automated system with SPECI capability and automated system without SPECI capability. In those examples, the AO2 reports are the ones labelled with SPECI capability and the AO1 reports are the ones labelled without it. That pairing is shown in the order's examples and should not be read as a rule for every station. The SPECI page explains the special report itself.

Outside the US

The AO1 and AO2 remarks are defined by the US handbooks. WMO-No. 782 describes the remarks section as national, and CAP 746 says UK civil aerodromes do not use it. None of these sources mentions AO1 or AO2 outside the US. So the practical rule is to treat the code as a US convention, and not to expect it in reports from other states.

Common mistakes

  • Reading AO1 or AO2 as a weather element. It identifies the station type.
  • Assuming AO2 means a better or more accurate station. The definition says only that it has a precipitation discriminator.
  • Treating the lack of the code as a fault. In a US report, JO 7900.5E says it indicates a manual station.
  • Mixing up AUTO and AO2. A report can come from an AO2 station and still lack AUTO if an observer augmented it.
  • Expecting the remark in non-US reports.

Method and limits

This page is based on the FMH-1 and JO 7900.5E definitions of the automated station types, the example reports printed in JO 7900.5E and the decoding text of the Aviation Weather Handbook. These sources do not say which sensors or precipitation types set AO1 stations apart in practice, or how other states treat the code. This page is educational and is not a source for operational weather.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does AO2 mean in a METAR?

AO2 identifies an automated station with a precipitation discriminator. FMH-1 and FAA Order JO 7900.5E both state that AO1 or AO2 is coded in all METAR and SPECI from automated stations. It appears in the remarks, after RMK, and describes the station, not the weather.

What is the difference between AO1 and AO2?

The only difference in the definition is the precipitation discriminator. AO1 stations do not have one and AO2 stations do. FMH-1 defines the discriminator as a sensor or array of sensors that differentiates between liquid, freezing and frozen precipitation.

Why is there no AO1 or AO2 in some METARs?

JO 7900.5E says the absence of the remark indicates a manual station. The code is required for automated stations, so a US report from a station staffed by an observer carries neither. Reports from other countries follow national rules and may not carry the remark at all.

Does AO1 or AO2 mean the report is automated, like AUTO?

They are separate items. AUTO in the body marks a fully automated report, while AO1 or AO2 in the remarks names the type of automated station. JO 7900.5E shows augmented reports from AO2 stations that have no AUTO in the body, since an observer added data.

Sources

  1. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1 (FCM-H1-2019)
  2. Federal Aviation Administration (2020). Order JO 7900.5E, Surface Weather Observing
  3. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A)