How to read a TAF, group by group

Tafrob editorial team · Updated · 8 min read

Short answer

A TAF (Terminal Aerodrome Forecast) is a coded forecast for one airport, valid 9, 24 or 30 hours. Read it in order: report type, ICAO identifier, issue time, validity period, then the baseline wind, visibility, weather and cloud. Change groups follow: FM starts a new self-contained forecast, BECMG a gradual lasting change, TEMPO short fluctuations, PROB30 or PROB40 a lower-probability alternative.

Key points

  • A TAF is read as a baseline forecast plus change groups that modify it in time order.
  • All times are UTC: the issue time has six digits plus Z, periods use DDHH/DDHH.
  • FM replaces everything before it; BECMG and TEMPO only list the elements that change.
  • US NWS TAFs do not use BECMG or PROB40, and US visibility is in statute miles (P6SM above 6 SM).
  • NWS guidance notes that the lowest conditions in a TAF, including TEMPO and PROB, drive operational decisions.
The former Stapleton airport control tower in Denver under a sky of broken clouds, with wet pavement in the foreground
Photo: Eric Johnson, CC BY-SA 3.0, via Wikimedia Commons

What is a TAF and what does it contain?

A TAF (Terminal Aerodrome Forecast) is a concise coded statement of the weather expected at one airport during a stated period. The European implementation of ICAO Annex 3, Regulation (EU) 2017/373, lists the content in a fixed order: type of forecast, location indicator, time of issue, a NIL marker if the forecast is missing, the period of validity, a CNL marker if it is cancelled, then surface wind, visibility, weather, cloud and the expected significant changes during the period. The same regulation states that a routine TAF is valid for 9, 24 or 30 hours and that only one TAF may be valid for an aerodrome at any time.

The US follows the same structure with national differences approved by the FAA. NWS Instruction 10-813 defines the forecast area as the airspace within 5 statute miles of the center of the runway complex and says a scheduled US TAF is ordinarily valid 24 hours, or 30 hours at airports designated by the FAA.

The codes inside a TAF are the same as in a METAR, so if you already know how to read a METAR, most of the body will be familiar. What is new is the time logic: a baseline forecast followed by change groups.

The header: type, station, issue time and validity

The header is read left to right, and each item has a fixed format.

Group Example Meaning
Report type TAF, TAF AMD, TAF COR Routine, amended or corrected forecast
Location EDDF, KJFK Four-letter ICAO location indicator
Issue time 181058Z Day 18, 1058 UTC
Validity 1812/1918 From day 18 at 1200 UTC to day 19 at 1800 UTC
Missing or cancelled NIL, CNL Forecast missing, or forecast cancelled

The validity group is two pairs of day and hour separated by a slash. A period ending at midnight is written with hour 24, so 0900/0924 in the NWS directive means the whole of the 9th. The full rules, including 9, 24 and 30-hour TAFs and US issue windows, are on the TAF validity period page. When a time matters, convert it carefully, especially across the end of a month.

The baseline forecast: wind, visibility, weather, cloud

The first part after the validity period is the prevailing forecast that applies from the start until the first change group says otherwise. The FAA AIM gives the order as wind, visibility, weather, sky condition and optional data (wind shear in US TAFs).

  • Wind 22012KT: direction in degrees true, rounded to 10, speed in knots. A gust is added when the forecast maximum exceeds the mean by 10 kt or more (EU rules, Transport Canada); NWS 10-813 defines gusts as a variation of 10 kt or more between peaks and lulls. VRB is used when no prevailing direction can be forecast, 00000KT means calm.
  • Visibility: ICAO TAFs use metres, with 9999 for 10 km or more. US TAFs use statute miles and P6SM for more than 6 SM.
  • Weather: the same codes as the METAR present weather group, for example -SHRA or +TSRA. The group is simply omitted when no significant weather is forecast. EU rules allow up to three weather groups.
  • Cloud: amount and height in hundreds of feet above the aerodrome (BKN008). CB is the only cloud type in a US TAF; ICAO TAFs may also show TCU. NSC (no significant cloud) is ICAO; US TAFs use SKC and never CLR, as stated in the AIM.

Optional national groups may follow: TX/TN temperatures, the US non-convective wind shear group WS020/27045KT, or Australian remarks with temperature and QNH.

The four change groups in one table

A TAF changes over time only through change groups, and each one has a precise meaning defined in Annex 3 and its national implementations.

Group Format Meaning Elements given
FM FM181700 (day, hour, minute) Rapid change to a new set of prevailing conditions All elements, self-contained
BECMG BECMG 1819/1822 Gradual lasting change at an unspecified time in the period Only changed elements
TEMPO TEMPO 1813/1818 Temporary fluctuations under 1 hour each, less than half the period in total Only changed elements
PROB30 / PROB40 PROB30 1902/1906 or PROB40 TEMPO ... 30 or 40 percent chance of an alternative or of temporary fluctuations Only the alternative elements

Each indicator has its own page: FM, BECMG, TEMPO and PROB30 and PROB40. One rule is common to BECMG and TEMPO in the EU text: when cloud changes significantly, all cloud groups are repeated, including the layers that do not change.

Worked example 1: an ICAO-style TAF

This illustrative 30-hour TAF uses metres and the full ICAO set of change groups.

TAF EDDF 181058Z 1812/1918 22012KT 9999 SCT030
      TEMPO 1813/1818 7000 -SHRA BKN014
      BECMG 1819/1822 25008KT 4000 RA BKN008 OVC020
      PROB40 TEMPO 1822/1902 1500 +RA BKN004 OVC010
      BECMG 1903/1906 31015KT 9999 NSW SCT025
Part Decode
TAF EDDF 181058Z Routine TAF for Frankfurt, issued day 18 at 1058 UTC
1812/1918 Valid from day 18, 1200 UTC to day 19, 1800 UTC (30 hours)
22012KT 9999 SCT030 Wind 220 degrees 12 kt, visibility 10 km or more, scattered cloud at 3,000 ft
TEMPO 1813/1818 7000 -SHRA BKN014 Between 1300 and 1800 UTC, temporary spells of 7 km in light rain showers with broken cloud at 1,400 ft
BECMG 1819/1822 25008KT 4000 RA BKN008 OVC020 Between 1900 and 2200 UTC, a lasting change to 250 degrees 8 kt, 4,000 m in moderate rain, broken at 800 ft, overcast at 2,000 ft
PROB40 TEMPO 1822/1902 1500 +RA BKN004 OVC010 40 percent chance, between 2200 and 0200 UTC, of temporary spells of 1,500 m in heavy rain with broken cloud at 400 ft
BECMG 1903/1906 31015KT 9999 NSW SCT025 Between 0300 and 0600 UTC on the 19th, change to 310 degrees 15 kt, 10 km or more, rain ending (NSW), scattered at 2,500 ft

Note NSW: since the previous prevailing line contained RA, the forecaster must say explicitly that the weather ends. See NSW.

Worked example 2: a US NWS TAF

NWS TAFs use statute miles, FM groups on new lines, and no BECMG. KJFK is one of the airports listed in Appendix F of NWS 10-813 for 30-hour TAFs.

TAF
KJFK 181130Z 1812/1918 20012KT P6SM SCT035 BKN250
     FM181700 19015G24KT 5SM -SHRA BR BKN025 OVC050
      TEMPO 1818/1821 2SM SHRA BR BKN012 BKN025 OVC050
     FM190100 32012KT P6SM SCT040
     FM191400 33015G25KT P6SM FEW050
Part Decode
1812/1918 Valid day 18 at 1200 UTC to day 19 at 1800 UTC
20012KT P6SM SCT035 BKN250 Wind 200 degrees 12 kt, visibility more than 6 SM, scattered 3,500 ft, broken 25,000 ft
FM181700 ... From 1700 UTC: 190 degrees 15 kt gusting 24, 5 SM light rain showers and mist, ceiling broken 2,500 ft
TEMPO 1818/1821 ... Between 1800 and 2100 UTC, temporary 2 SM in rain showers and mist, broken 1,200 ft; all layers repeated because the cloud changes
FM190100 32012KT P6SM SCT040 From 0100 UTC on the 19th, a complete new forecast: no weather group, so no significant weather
FM191400 ... From 1400 UTC, 330 degrees 15 kt gusting 25, more than 6 SM, few clouds at 5,000 ft

The FM groups repeat the wind even when it does not change, because NWS 10-813 requires all elements in each FM group. The weather group simply disappears after FM190100: NSW is never used in an FM group in the US.

How do you find the conditions for a given time?

Reading a TAF for an arrival time is a two-step process that every decoder, including the TAF decoder on this site, follows.

  1. Find the prevailing conditions: start with the baseline, apply each FM from its time, and apply each BECMG once its period has ended. Inside a BECMG period, both the old and the new values are possible.
  2. Overlay the conditional groups: if a TEMPO or PROB period covers the time, its values describe what may occur on top of the prevailing conditions.

Two cautions from the official texts help avoid misreading. The AIM reminds users that FM100000 means 0000 UTC on the 10th and must not be confused with 1000 UTC. And NWS 10-813 tells forecasters that the lowest condition in a TAF, regardless of conditional language such as TEMPO or PROB, drives user operational decisions. For how planning rules treat each group, see TEMPO vs BECMG vs FM.

ICAO and US differences at a glance

The US applies the ICAO TAF code with a short list of approved national differences, and other states have their own.

Item ICAO / Europe US (NWS) Canada Australia
Visibility unit Metres, 9999 Statute miles, P6SM Statute miles, P6SM Metres, 9999
BECMG Yes Not used Yes Yes
PROB40 Yes Not used (PROB30 only) Yes Yes
CAVOK Yes Not used Not authorized Yes
Other TX/TN optional WS low-level wind shear group RMK NXT FCST BY INTER group, T and Q in RMK

The frequency box on this page shows how often FM, BECMG and TEMPO appear in the TAFs collected for this site (the TAF statistics page in the data section explains the method).

Method and limits

This page summarizes the cited documents for education. It is not an operational source: always use an official briefing and the current TAF from your national provider.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What is the difference between a TAF and a METAR?

A METAR is an observation of the weather at one moment. A TAF is a forecast for the same airport over a validity period of 9, 24 or 30 hours. They share the same codes for wind, visibility, weather and cloud, but the TAF adds change groups (FM, BECMG, TEMPO, PROB) to describe how conditions are expected to evolve.

How often are TAFs issued?

Routine TAFs are generally issued four times a day. In the US, the NWS issues them at 0000, 0600, 1200 and 1800 UTC, with three-hourly scheduled amendments at the FAA Core 30 airports. Canada notes that some TAFs have update cycles as frequent as every three hours. Amendments (TAF AMD) can be issued at any time.

What area does a TAF cover?

In the US, a TAF covers the area within 5 statute miles of the center of the runway complex, according to NWS Instruction 10-813. In Canada, TAFs relate to operations within 5 nautical miles of the runway complex center. The Australian Bureau of Meteorology uses a radius of 8 kilometres around the aerodrome reference point.

Why does a US TAF never contain BECMG?

The NWS chose not to use BECMG in its TAFs. NWS Instruction 10-813 lists BECMG, CAVOK, NSC and PROB combined with TEMPO among the international groups not used in NWS TAFs. US forecasters describe changes with FM groups, timed to the minute when possible, plus TEMPO and PROB30. US military TAFs follow different rules.

Which line of a TAF applies at a given time?

Find the last FM or completed BECMG before your time: that defines the prevailing conditions. Then check whether a TEMPO or PROB period covers your time: those describe possible worse or better conditions on top of the prevailing ones. During a BECMG period, either the old or the new conditions can occur.

Sources

  1. National Weather Service (2024). NWS Instruction 10-813, Terminal Aerodrome Forecasts (October 30, 2024)
  2. Federal Aviation Administration. Aeronautical Information Manual, chapter 7, section 1 (paragraph 7-1-28 and glossary entry Aerodrome Forecast)
  3. European Union (EUR-Lex) (2017). Commission Implementing Regulation (EU) 2017/373, Annex V (Part-MET), aerodrome forecasts and TAF template
  4. Transport Canada (2025). TC AIM, MET section 7.0 Aerodrome forecasts (TAFs)
  5. Bureau of Meteorology. Aerodrome forecast (TAF and TAF3)
  6. Met Office. GetMet: aerodrome forecast TAF decode
  7. Hong Kong Observatory. Decoding Aerodrome Forecast (TAF)