
TAF / 16 guides
How to read a TAF: change groups, validity and amendments
A TAF is the official forecast for an airport, valid 9 to 30 hours. Most reading errors come from the change groups: FM, BECMG, TEMPO and PROB do not mean the same thing and do not combine freely. These guides explain each one with the rules from ICAO Annex 3 and the FAA.
How to read a TAF, group by group
How to read a TAF line by line: header, validity, wind, visibility, weather, cloud and the FM, BECMG, TEMPO and PROB groups, with ICAO and US examples.
TAF validity period: how to read DDHH/DDHH
The TAF validity group DDHH/DDHH explained: 9, 24 and 30 hour forecasts, why the end hour can be 24, issue times and when a new TAF replaces the old.
FM group in a TAF: the FROM change group explained
How to read FM in a TAF: the six digit time, why it replaces everything before it, what must be repeated, and how NWS, EU and Canadian rules differ.
BECMG in a TAF: the gradual change group explained
What BECMG means in a TAF, how the two time period works, the 4 hour limit, what to repeat, and why NWS forecasters do not use it while ICAO and Canada do.
TEMPO in a TAF: temporary fluctuations explained
What TEMPO means in a TAF: the under 1 hour and half the period rules, the 4 hour limit, what to repeat, and how NWS, EU and Canadian rules compare.
PROB30 and PROB40 in a TAF: probability groups explained
What PROB30 and PROB40 mean in a TAF, how PROB TEMPO works, why NWS uses only PROB30, and why no PROB50 or higher group exists in the code.
TEMPO vs BECMG vs FM: the TAF change groups compared
TEMPO, BECMG and FM compared side by side: duration, timing, what each replaces, common misreadings, and how planning rules treat each change group.
NSW in a TAF: what no significant weather means
What NSW means in a TAF or TREND, which weather it ends, where it can appear, how NWS rules differ, and how NSW differs from CAVOK and NSC.
TX and TN in a TAF: the maximum and minimum temperature groups
How to read the TX and TN groups in a TAF: format, minus sign, timing, where the group sits, and which forecasters use it while NWS TAFs leave it out.
TAF AMD, COR and CNL: amended, corrected and cancelled TAFs
What TAF AMD, TAF COR and CNL mean, when forecasters amend a TAF, the NWS amendment criteria, and what AMD NOT SKED, AMD LTD TO and NIL TAF tell a pilot.
Low level wind shear in a TAF: reading the WS group
How to read the WS group in a TAF, such as WS020/27055KT: layer top, wind at that height, when it is forecast, where it sits, and US versus Canadian rules.
TAF vs METAR: what each report tells you
The difference between a TAF and a METAR: observation versus forecast, issue times, area covered, groups each one carries, and how pilots use both together.
Using TAFs for flight planning: alternates, fuel and change groups
How TAFs feed flight planning: the FAA 1-2-3 alternate rule, alternate minima and IFR fuel, and the EASA table on how FM, BECMG, TEMPO and PROB apply.
How accurate are TAFs?
What accuracy a TAF aims for: the EASA and ICAO targets for wind, visibility, cloud and temperature, how forecasts are verified, and how to read a TAF's limits.
Military TAF groups: icing, turbulence and QNH
How to read the extra groups in US military TAFs: the 6 icing group, the 5 turbulence group, the QNH lowest altimeter group and the T temperature groups.
Thunderstorms in a TAF: TS, VCTS and CB
How thunderstorms are coded in a TAF: the TS qualifier, VCTS, the CB cloud type, PROB30 TSRA and TEMPO groups, and the rules forecasters follow for convection.