T group in a METAR: hourly temperature to the tenth of a degree

Tafrob editorial team · Updated · 6 min read

Short answer

The T group is a US METAR remark that gives temperature and dew point to a tenth of a degree Celsius, such as T00261015 for 2.6 C and -1.5 C. After T, each value has a sign digit (0 positive, 1 negative) and three digits in tenths. Related groups starting with 1, 2 and 4 carry 6-hour and 24-hour extremes.

Key points

  • T00261015 reads as temperature +2.6 C (sign 0, 026) and dew point -1.5 C (sign 1, 015); the body of the same report shows 03/M01.
  • In the T group the sign digit is 1 for a value below 0 C and 0 for 0 C or higher, and there are no spaces.
  • If the dew point is missing only the temperature is reported; if the temperature is missing the group is not reported.
  • 1snTTT is the 6-hour maximum, 2snTTT the 6-hour minimum, and 4snTTTsnTTT the 24-hour maximum and minimum.
  • These groups are additive data at designated stations, and the temperature in remarks is only reported in METARs.
Maximum and minimum thermometers mounted inside a white louvered cotton region shelter at a weather station
Photo: Famartin, CC BY-SA 4.0, via Wikimedia Commons

What is the T group in a METAR?

The T group is a remark that repeats the temperature and dew point of the report to the nearest tenth of a degree Celsius. The body of a METAR gives both values in whole degrees, for example 03/M01. The T group adds the decimal that the body rounds away, as in T00261015. For how the body values are coded, see temperature and dew point.

FMH-1 sets the resolution: temperature and dew point in the body are whole degrees Celsius, and in the remarks section they are to the nearest tenth of a degree. The Aviation Weather Handbook calls this group the hourly temperature and dew point, reported at designated stations. Designated stations are the ones that carry additive data, a subject covered on the additive data groups page.

How is the T group built?

The format in FMH-1 is TsnT'T'T'snT'dT'dT'd. Reading it left to right:

Part Meaning Value in T00261015
T Group indicator T
sn Sign of temperature: 1 below 0 C, 0 for 0 C or higher 0 (positive)
T'T'T' Temperature in tens, units and tenths of C 026 (2.6 C)
sn Sign of dew point 1 (negative)
T'dT'dT'd Dew point in tens, units and tenths of C 015 (1.5 C)

There are no spaces between the entries. FMH-1 uses exactly this example: a temperature of 2.6 C and a dew point of -1.5 C appear in the body as 03/M01 and in the group as T00261015. The body carries only whole degrees, so the same observation is rounded there to 03 and M01.

The sign digit is a flag, not part of the number, which is the most common source of confusion. A value of 0.0 C or higher is coded with sign 0, and any value below 0 C is coded with sign 1. The three digits that follow are always the absolute size in tenths.

What does a real-looking T group decode to?

The Aviation Weather Handbook decodes this report:

KPNS 030053Z 36005KT 10SM CLR 30/23 A2992 RMK AO2 SLP132 T03000233
  • 30/23: temperature 30 C and dew point 23 C in whole degrees.
  • T03000233: sign 0 and 300 gives 30.0 C; sign 0 and 233 gives 23.3 C.
  • SLP132: sea level pressure, covered on the SLP page.

Notice that the whole-degree body value 23 is consistent with 23.3, and 30 with 30.0. The T group never contradicts the body: it only refines it.

A negative case built for this page, to show the sign digit (it is an illustration, not a report from a source):

T10451068

Sign 1 and 045 give -4.5 C, and sign 1 and 068 give -6.8 C. In the T group the sign digit takes the place of the M prefix used in the body.

What happens when a value is missing?

FMH-1 and the Aviation Weather Handbook agree on the two cases. If the dew point is missing, only the temperature is reported. If the temperature is missing, the hourly temperature and dew point group is not reported at all. FMH-1 words it as "if dew point is missing report the temperature; if the temperature is missing do not report the temperature/dew point group."

FMH-1 does not show the layout of a temperature-only group in the passage used for this page, so do not assume how the missing half is written. A decoder should handle a T group that is shorter than the full eight characters rather than assume the full pattern is always present.

What are the 6-hour maximum and minimum groups?

Two more groups carry the temperature extremes of the previous six hours. FMH-1 gives their formats:

Group Format Meaning FMH-1 example
6-hour maximum 1snTxTxTx Maximum temperature in tenths of C 11021 is -2.1 C; 10142 is 14.2 C
6-hour minimum 2snTnTnTn Minimum temperature in tenths of C 21001 is -0.1 C; 20012 is 1.2 C

The first digit is the group indicator (1 for the maximum, 2 for the minimum), the second is the sign (1 for below 0 C), and the last three are tenths of a degree. In 11021, the leading 1 is the maximum indicator, the next 1 is the negative sign, and 021 is 2.1, giving -2.1 C. In 20012, the 2 marks a minimum, the 0 is positive, and 012 is 1.2 C.

Timing is set by FMH-1: the 6-hour maximum and minimum are determined for the 0000, 0600, 1200 and 1800 UTC observations, so these groups appear only in those 6-hourly METARs.

What is the 24-hour maximum and minimum group?

The 4-group combines both 24-hour extremes in one nine-character group. FMH-1 gives the format 4snTxTxTxsnTnTnTn: the indicator 4, then the sign and value of the maximum, then the sign and value of the minimum.

Group Maximum Minimum
401001015 10.0 C -1.5 C
401120084 11.2 C 8.4 C

Both examples are from FMH-1. Reading 401001015: indicator 4, sign 0 and 100 for the maximum of 10.0 C, then sign 1 and 015 for the minimum of -1.5 C. In 401120084, the maximum is sign 0 and 112, which is 11.2 C, and the minimum is sign 0 and 084, which is 8.4 C.

FMH-1 says the temperatures for the previous 24 hours are determined for the 0000 LST observation. So the 4-group follows local standard time, not UTC, and it appears in the METAR taken at 0000 LST. FMH-1 requires the time standard to be indicated on all records and, if LST is used, the number of hours used to convert to it. For a station in a time zone offset from UTC the 0000 LST report therefore falls at a different UTC hour than the 6-hourly ones.

Where do these groups sit in the remarks?

All of these groups are additive data. In the Aviation Weather Handbook table of remarks order, the additive data items come after the sea level pressure item. In a long remarks section SLP therefore comes first, which matches the Handbook's decoded example above, where SLP132 comes before T03000233. For the position of everything else in RMK, see METAR remarks (RMK).

JO 7900.5E, the FAA order for surface observing, has matching paragraphs for the hourly T group (13.52) and the 6-hourly maximum temperature (13.53). The Aviation Weather Handbook adds that additive data groups are only reported at designated stations and are primarily used by the NWS for climatological purposes, so most have no direct impact on the aviation community.

Common mistakes

  • Reading the sign digit as part of the number. In T00261015 the 0 and the 1 are signs, not a 0 and 1 hundreds digit.
  • Reading 026 as 26 degrees. The value is in tenths, so 026 is 2.6 C.
  • Expecting the T group in SPECI reports. FMH-1 limits temperature in remarks to METARs.
  • Treating the 4-group as a UTC-day figure. FMH-1 ties the 24-hour extremes to the 0000 LST observation.
  • Confusing the 1 and 2 groups with other remarks that begin with the same digit. Check where the group sits and how long it is: the 6-hour groups are five characters.

This page is educational and is not a source for operational weather. For the full report layout, see how to read a METAR.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does T00261015 mean in a METAR?

T00261015 is the hourly temperature and dew point group. The first 0 means the temperature is positive and 026 means 2.6 C. The next 1 means the dew point is negative and 015 means 1.5 C. So the temperature is 2.6 C and the dew point is -1.5 C. FMH-1 shows the body of the same report as 03/M01.

Why is the T group more precise than 03/M01?

The body of a METAR reports temperature and dew point in whole degrees Celsius. In the remarks, FMH-1 sets the resolution to the nearest tenth of a degree. The T group therefore carries the same observation without the whole-degree rounding, which is why 2.6 C appears as 03 in the body and 026 in the remarks.

What do the 1, 2 and 4 groups in remarks mean?

They are temperature extremes. 1snTxTxTx is the 6-hour maximum, 2snTnTnTn is the 6-hour minimum, and 4snTxTxTxsnTnTnTn is the 24-hour maximum followed by the minimum. Each value is in tenths of a degree Celsius with a sign digit, where 1 means below 0 C. FMH-1 gives 11021 as a maximum of -2.1 C.

Is the T group also in SPECI reports?

No. FMH-1 states that temperature and dew point in the remarks section shall only be reported in METARs, and the max/min groups are likewise remarks of the METAR. A SPECI therefore does not carry the T group even when the station is a designated station. Compare with the whole-degree temperature in the body of the report.

Sources

  1. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1 (FCM-H1-2019)
  2. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A)
  3. Federal Aviation Administration (2021). Order JO 7900.5E, Surface Weather Observing, Change 1