The history of the METAR: from the US SA code to IWXXM
METAR is the international code for routine aerodrome weather reports. The Aviation Weather Handbook says the METAR and SPECI code was first developed in 1968. The US used its own SA code for over 30 years, converted international dissemination on January 1, 1996 and domestic dissemination on July 1, 1996. Today IWXXM carries METAR data in XML.
Key points
- The Aviation Weather Handbook says the METAR and SPECI code was first developed in 1968.
- The US weather service described its SA code as in place for over 30 years before the change to METAR.
- International dissemination in METAR began for the US on January 1, 1996, and domestic dissemination on July 1, 1996.
- The FMH-1 foreword calls the move a step toward a common, world-wide aviation weather observation code.
- IWXXM is the WMO information model that gives METAR, SPECI and TAF an XML representation required by ICAO Annex 3.

Why a history page?
The METAR format looks arbitrary until you know where it came from. Some of its features, such as the A and Q pressure groups, the SM suffix or the RMK section, trace back to national practice that existed before the international code. This page collects the dated facts that official documents confirm and says plainly where the record is thin.
The 1968 code
The Aviation Weather Handbook, an FAA publication, says the hectopascal was adopted by most countries after the introduction of SI units in 1960. It states that the hectopascal is used in the METAR and SPECI code first developed in 1968, and that inches of mercury remain in use in the US for altimetry.
That sentence is the earliest dated reference to the code found in a primary source. No primary document cited here describes who drafted the 1968 code or how it was adopted, so this page states no more than that.
What the abbreviations mean
The National Weather Service FAQ describes METAR as the international standard code for hourly surface weather observations. It says the name roughly translates from French as Aviation Routine Weather Report. SPECI is given as Aviation Selected Special Weather Report, the code name for METAR-formatted products issued on a special non-routine basis. TAF is the international standard terminal forecast code, Terminal Aerodrome Forecast.
For how the report is read today, see how to read a METAR, and for the special report see the SPECI page.
The US before METAR: the SA code
Before METAR, US stations used the SA code for surface observations, and FT for terminal forecasts. The NWS FAQ describes METAR as analogous to the SA coding and TAF as analogous to FT. It also says the SA code had been in place for over 30 years. The foreword to the fifth edition of the Federal Meteorological Handbook No. 1 adds that the SAO code was used for over 40 years in the US and North America.
The two documents give different durations and use different names (SA in the FAQ, SAO in the foreword). Both are reported here as written, without reconciling them.
The US transition, 1993 to 1996
The NWS FAQ gives these dates:
| Date | Event |
|---|---|
| July 1993 | Phase 1 completed. The US began converting SA products to METAR for international dissemination, and the NWS also issued FT and TAF for 102 larger international airports |
| January 1, 1996 | NWS converted to METAR for international dissemination and to TAF at 90 locations |
| February 1, 1996 | TAF added at 12 more airports |
| July 1, 1996, 0800 UTC | Domestic dissemination converted. SAs and FTs were replaced by METARs and TAFs and discontinued |
The FAQ says the FAA determined the transition was vital to worldwide standardization, and the NWS complied. It also says certified observers had to demonstrate proficiency with the new code, with no recertification, while observers new after July 1, 1996 had to be certified in METAR.
A secondary source gives a different day in June 1996 for the domestic change. It conflicts with the NWS FAQ, so this page uses the NWS date.
What the US handbook says about the goal
The foreword to the fifth edition of FMH-1 says the edition embodies the US conversion to the WMO METAR and SPECI codes. It calls this a major step toward fulfilling a WMO and ICAO goal of a common, world-wide aviation weather observation code form. It also describes the change as a paradigm shift for observers.
The result was not complete uniformity. FMH-1 says its coding conforms to the WMO forms but with United States exceptions filed with the WMO. The US versus ICAO comparison lists the differences that remain, and the units page shows how national unit choices persist.
From plain text to IWXXM
The text form of the METAR was designed for teletype and radio links, where every character counted. The image on this page shows a Baudot teleprinter code variant, with arrows on keys for wind direction, of the kind formerly used to send weather information on teleprinter circuits. It illustrates the medium these codes were made for. It is not tied to a specific METAR date.
Today the WMO publishes IWXXM, described on its site as an information model designed for the operational exchange of meteorological information for aviation. It includes representations for METAR, SPECI and TAF, and is called the official representation of meteorological information required by ICAO Annex 3. The 2025-2 release has a METAR and SPECI package at version 3.2.0 and a TAF package at version 3.0.2, and corresponds to Amendment 82 of Annex 3. The WMO community table maps earlier IWXXM versions to Amendments 76 to 82 of the Annex.
The sources cited here give no calendar years for those amendments or for the first IWXXM release, so none are given. WMO-No. 782 mentions an IWXXM form for RVR and for temperature, and FMH-1 does not mention IWXXM.
How to use this history when reading reports
Knowing the timeline explains several habits. A pilot trained on US reports may expect inches of mercury and statute miles, because the US kept its national units when it adopted the international structure. A pilot reading a report from another country may meet hectopascals, meters and CAVOK, which the same family of codes allows. The QNH and altimeter page and the visibility page show these choices in practice.
What did not change
The core ideas of the code are stable: a station identifier, a time group, wind, visibility, weather, cloud, temperature and pressure, in a fixed order. See the station identifier and time group page for the first groups, and the remarks page for the US addition.
What the sources do not confirm
- Who drafted the 1968 code and how it was adopted, beyond the Aviation Weather Handbook sentence.
- The calendar years of Annex 3 amendments and IWXXM releases.
- The history of the TAF beyond the dates in the NWS FAQ.
This page is educational and is not a source for operational weather. Dates come from the sources listed below, and archived pages describe the situation at the time they were saved.
Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).
Frequently asked questions
What does METAR stand for?
The US National Weather Service FAQ says the term roughly translates from French as Aviation Routine Weather Report. It describes METAR as the international standard code for hourly surface weather observations, and SPECI as Aviation Selected Special Weather Report, issued on a special non-routine basis.
When did the US switch from SA to METAR?
The NWS converted international dissemination to METAR on January 1, 1996. It converted domestic dissemination at 0800 UTC on July 1, 1996, when SA reports and FT forecasts were replaced by METAR and TAF and then discontinued. The archived NWS FAQ gives both dates.
Why did the US change codes?
The NWS FAQ says the FAA determined the transition was vital to worldwide standardization and the NWS complied. The FMH-1 foreword calls it a step toward a common, world-wide aviation weather observation code shared by WMO and ICAO.
Is the METAR still sent as plain text?
The text form is still in wide use. WMO also publishes IWXXM, an information model for operational exchange of aviation weather data, with representations for METAR, SPECI and TAF. It is described as the official representation of information required by ICAO Annex 3.
Sources
- Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A)
- National Weather Service, NOAA (2008). METAR/TAF Frequently Asked Questions (archived 2008)
- National Weather Service, NOAA (2008). Federal Meteorological Handbook No. 1, 5th edition foreword (archived 2008)
- World Meteorological Organization (2025). IWXXM, ICAO Meteorological Information Exchange Model
- WMO Community (2025). IWXXM version table
- World Meteorological Organization (2025). Aerodrome Reports and Forecasts, A Users' Handbook to the Codes (WMO-No. 782)