Intensity and vicinity in METAR: -, +, no sign and VC
In a METAR, a minus sign means light, no sign means moderate and a plus sign means heavy (or well developed for funnel clouds and dust whirls). Intensity applies to precipitation, not to fog or haze. VC means in the vicinity: in the US, 5 to 10 statute miles from the point of observation; under WMO guidance, roughly 8 to 16 km from the aerodrome reference point. VC never carries an intensity sign.
Key points
- Minus is light, no sign is moderate, plus is heavy; the sign comes first in the group.
- In the US, intensity is coded on precipitation except IC, GR and UP; never on BLDU, BLSA or BLSN.
- With several precipitation types in one group, the sign describes the total precipitation (FMH-1, CAP 746).
- VC is 5 to 10 SM in US METARs; WMO-No. 782 gives about 8 to 16 km, while CAP 746 and the AIM say within about 8 km.
- VC is combined only with a short list of phenomena and never with an intensity sign.

What do -, no sign and + mean in a METAR?
The intensity qualifier is the first character of a present weather group and has three values: - light, no sign moderate, + heavy. FMH-1 puts it plainly: "To denote moderate intensity no entry or symbol is used." The sign always comes before the descriptor, so heavy rain showers are +SHRA, never SH+RA.
| Written | Read as | Example | Decode |
|---|---|---|---|
- |
Light | -DZ |
Light drizzle |
| (none) | Moderate | SN |
Moderate snow |
+ |
Heavy | +TSRA |
Thunderstorm with heavy rain |
+ on FC |
Tornado or waterspout | +FC |
Well-developed funnel reaching the surface |
VC |
In the vicinity | VCSH |
Showers in the vicinity |
The sign describes the precipitation, not the descriptor. The AIM notes that although TS and SH are used with precipitation and may carry an intensity symbol, "the intensity still applies to the precipitation, not the descriptor." So +TSRA is a thunderstorm with heavy rain, not a heavy thunderstorm.
Which phenomena can take an intensity?
The answer depends on whose rules you read, and this is where US and ICAO reports diverge.
United States (FMH-1, 12.6.8.a):
- Intensity is coded with precipitation types, including those with TS and SH, except ice crystals (IC), hail (GR) and unknown precipitation (UP).
- No intensity is given to blowing dust, sand or snow (
BLDU,BLSA,BLSN). - Sandstorm and duststorm take only moderate or heavy (
SS,+SS,DS,+DS). - Tornadoes and waterspouts are
+FC. - Snow pellet intensity was, at the 2019 edition, entered in remarks as
GS LGT,GS MODorGS HVYbecause of an ASOS software limitation.
ICAO practice:
- WMO-No. 782: intensity is reported only with precipitation (including showers and thunderstorms with precipitation), duststorms or sandstorms.
- CAP 746 (UK): intensity is reported for precipitation (including that qualified by FZ, SH or TS) and for blowing snow, so
+BLSNis legal in a UK METAR but not in a US one. The+may also qualify a well-developed funnel cloud, waterspout or dust/sand whirl.
How is intensity measured?
US intensity rules are explicit and differ by precipitation type. Rain and ice pellets use rate of fall; snow, snow pellets and drizzle use visibility when occurring alone.
| Type | Light | Moderate | Heavy |
|---|---|---|---|
| Rain, ice pellets (rate, FMH-1 Table 8-1) | Up to 0.10 in/h | 0.11 to 0.30 in/h | More than 0.30 in/h |
| Snow, snow pellets, drizzle (visibility, FMH-1 Table 8-4) | More than 1/2 SM | More than 1/4 SM up to 1/2 SM | 1/4 SM or less |
Under ICAO there is no single binding scale. CAP 746 states that "no definitions have been agreed internationally" for light, moderate and heavy, and it publishes UK guidance instead. WMO-No. 782 gives rate criteria: drizzle light below 0.1 mm/h and heavy from 0.5 mm/h; rain light below 2.5 mm/h and heavy from 10.0 mm/h; snow light below 1.0 mm/h liquid equivalent and heavy from 5.0 mm/h. Details per code are on RA rain, SN snow and DZ drizzle.
What does the sign mean when several precipitation types fall together?
Mixed precipitation goes into one group, dominant type first, with a single sign. FMH-1 says the qualifier "shall represent the intensity of the total precipitation", and CAP 746 uses the same wording. FMH-1 also caps the intensity: with more than one form, or precipitation with an obscuration, the intensity may be no greater than if any form were occurring alone.
The AIM example reads differently: it decodes +SHRASNPL with the note that the intensity indicator refers to the predominant rain. When the two FAA documents disagree, the coding standard is FMH-1; treat the AIM wording as a simplification.
What does VC mean and how far is the vicinity?
VC is the proximity qualifier: the weather is near the airport but not at the point of observation. The distances are not the same in every document, which is the most common source of confusion.
| Source | Vicinity definition |
|---|---|
| FMH-1 8.5 (US METAR) | Between 5 and 10 SM of the point(s) of observation; within 5 SM counts as at the station; beyond 10 SM is distant (DSNT) |
| AIM 7-1-28 (US TAF) | 5 to 10 SM from the center of the runway complex |
| WMO-No. 782 (2025) | Approximately between 8 and 16 km of the aerodrome reference point |
| NZ CAA code card | Between 8 km and 16 km from the aerodrome reference point |
| CAP 746 (UK, 2023) | Within approximately 8 km of the aerodrome reference point |
| AIM 7-1-28 (outside the US) | Within 8000 m |
FMH-1 also contains a special case: precipitation not at the point of observation but within 10 SM is reported as showers in the vicinity, VCSH. For automated lightning, the US uses nautical miles from the airport reference point (TS within 5 NM, VCTS from 5 to 10 NM).
Which codes can VC be combined with?
VC works only with a short list of phenomena, and never with a sign.
- US (FMH-1): TS, FG, SH, PO, BLDU, BLSA, BLSN, SS, DS.
VCFGcovers any type of fog nearby. - NZ CAA: TS, DS, SS, FG, FC, SH, PO, BLDU, BLSA, BLSN and VA.
- CAP 746: blowing dust, sand and snow, funnel cloud, waterspout, dust/sand whirls, fog, shower and thunderstorm; for VCSH and VCTS the precipitation type is not given.
So VCFC or VCVA can appear in some ICAO reports but are not on the US list. The common combinations are decoded on VCSH, VCTS, VCFG.
Decoded examples
METAR KDEN 181853Z 33014G22KT 10SM VCSH SCT070 BKN120 08/M02 A3012
VCSH: precipitation within 10 SM but not at the airport, intensity and type not coded. Visibility 10 SM, so no obscuration is reported.
METAR LFPG 180930Z 22008KT 3000 -RADZ BR BKN007 OVC015 09/08 Q1011
-RADZ: light precipitation in total, rain dominant, with drizzle; BR mist, consistent with 3,000 m visibility.
Common mistakes
- Reading
-TSRAas a weak thunderstorm: the sign is the rain rate. - Reading
SNas "snow, intensity unknown": it is moderate snow. - Assuming VC means within 5 miles: in US reports it starts at 5 SM.
- Adding the sign to each precipitation type in
-RASN: one sign covers the total.
The group as a whole is explained on the present weather group, and all codes are listed on the METAR weather codes list. Use the frequency box on this page to see how often VC appears in the site's data.
Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).
Frequently asked questions
What does no sign mean before a weather code?
No sign means moderate intensity. FMH-1 states that to denote moderate intensity no entry or symbol is used, so RA is moderate rain and SN is moderate snow. A missing sign does not mean the intensity is unknown; when it cannot be assessed, as with VCSH, the code says so through its own rules.
How far is vicinity in a METAR?
In US METARs, vicinity is between 5 and 10 statute miles from the point of observation, and in US TAFs 5 to 10 SM from the center of the runway complex (AIM). WMO-No. 782 gives approximately 8 to 16 km from the aerodrome reference point for ICAO reports, but CAP 746 and the AIM describe ICAO vicinity as within about 8 km, so check the national publication.
Can a METAR report +VCSH?
No. FMH-1 says intensity qualifiers shall not be coded with VC, and the AIM repeats that intensity and VC will not appear together. CAP 746 adds that for phenomena in the vicinity the intensity is never reported. A shower near the airport is simply VCSH, whatever its strength.
What does a plus sign mean with FC?
With funnel cloud, the plus sign does not mean heavy precipitation. FMH-1 states that tornadoes and waterspouts are coded as +FC, while a funnel cloud that does not reach the surface is FC. WMO-No. 782 uses the same convention, calling the plus sign well developed for funnel clouds and dust or sand whirls.
Sources
- Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1 (FCM-H1-2019), paragraphs 8.4.1, 8.5 and 12.6.8
- Federal Aviation Administration. Aeronautical Information Manual, chapter 7, section 1
- World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
- UK Civil Aviation Authority (2023). CAP 746 Requirements for meteorological observations at aerodromes, Issue 6
- Civil Aviation Authority of New Zealand. Code for significant present and forecast weather at the aerodrome