DR and BL: drifting and blowing snow, dust and sand
DR and BL describe snow, dust or sand raised from the ground by the wind. DR, low drifting, means the particles stay below about 2 m (6 ft in US practice) and do not reduce visibility at eye level. BL, blowing, means they rise to 2 m or more and reduce horizontal visibility. DRSN and BLSN are the common snow codes; BLSN can be reported with SN when snow is also falling.
Key points
- DR (low drifting) and BL (blowing) describe particles lifted from the ground by the wind, not falling from cloud.
- The dividing line is about 2 m in WMO and UK rules, and 6 feet in FMH-1.
- DR and BL are used with SN, DU and SA; FMH-1 also allows BLPY for blowing spray.
- DR codes are reported whatever the visibility; BL reduces visibility at eye level.
- SN BLSN means snow is falling and also being blown; BLSN alone is used when the observer cannot tell.
- FMH-1 codes no intensity with BLDU, BLSA or BLSN, while UK practice allows an intensity for BLSN.

Weather that comes from the ground
Most present weather codes describe something falling from a cloud or suspended in the air. DR and BL describe something else: particles lying on the ground that the wind picks up and carries. Snow on a runway, dust on a dry plain and sand in a desert can all be raised this way, and the result can range from a harmless shimmer across the tarmac to a whiteout.
The two descriptors are placed in front of the material:
| Code | Meaning |
|---|---|
DRSN |
Low drifting snow |
BLSN |
Blowing snow |
DRDU |
Low drifting dust |
BLDU |
Blowing dust |
DRSA |
Low drifting sand |
BLSA |
Blowing sand |
BLPY |
Blowing spray (FMH-1) |
They appear in the present weather group. FMH-1 states that DR and BL are used only with DU, SA and SN, with BLPY as the only case of spray; PY spray has its own page.
The height rule
The difference between the two is how high the particles rise.
- DR, low drifting. WMO-No. 782 describes dust, sand or snow raised by the wind to less than 2 m above the ground. CAP 746 uses the same 2 m limit. FMH-1 uses less than 6 feet.
- BL, blowing. WMO-No. 782 describes dust, sand or snow raised by the wind to 2 m or more above the ground, with a reduction of horizontal visibility. FMH-1 uses 6 feet or more.
The Transport Canada AIM gives the same line: DR below 2 m, BL above. The 2 m figure matches the assumed eye level of the observer used elsewhere in the code, for example for shallow fog on the MI, BC and PR page. Low drifting particles pass below the observer's eyes, so they do not lower the reported visibility; blowing particles fill the line of sight and do.
FMH-1 draws the consequence: DRDU, DRSA and DRSN are reported whatever the visibility. BL is expected to come with reduced visibility, and the visibility value in the report is the one to read for the severity.
Blowing snow and falling snow
Snow causes the most common confusion. In strong wind during a snowfall, it is hard to tell how much of the snow in the air has just fallen from the cloud and how much has been lifted from the ground. The code allows both to be reported:
METAR KXYZ 150655Z 33030G42KT 1/4SM SN BLSN VV005 M12/M14 A2978
This schematic line reads: wind from 330 degrees at 30 knots gusting 42, visibility a quarter of a statute mile, moderate snow, blowing snow, sky obscured with a vertical visibility of 500 feet. FMH-1 states that SN BLSN is used when snow is falling and blowing snow is also present, and that BLSN alone is coded when the observer cannot determine whether snow is also falling. The Transport Canada AIM notes the same pairing, with BLSN and SN reported in separate groups. NWS Instruction 10-813 uses the same combination in TAFs, where SN BLSN indicates snow falling from clouds together with blowing snow. Falling snow is covered on the SN snow page.
Intensity
The rules differ between the United States and the UK.
- FMH-1 states that no intensity is coded with BLDU, BLSA or BLSN.
- CAP 746 states that the intensity qualifier applies to blowing snow in the UK, so
+BLSNor-BLSNmay appear in reports outside the United States.
DR never takes an intensity in the sources cited here.
Dust and sand
Drifting and blowing dust and sand follow the same height rule. WMO-No. 782 notes one point specific to sand: low drifting sand (DRSA) is not subject to the 5000 m visibility rule that applies to DU and SA in suspension. Dust or sand hanging in the air, without a wind lifting it from the ground, is coded DU or SA alone, explained on the DU and SA dust and sand page. A storm of dust or sand reducing visibility sharply is coded DS or SS.
In the vicinity and in a TAF
Blowing material may be reported near the aerodrome. FMH-1 allows VCBLDU, VCBLSA and VCBLSN for blowing dust, sand or snow in the vicinity, decoded on the VCSH, VCTS and VCFG page.
DR and BL can also be forecast. WMO-No. 782 lists low drifting snow among the phenomena that may be included in a TAF. WMO-No. 782 also notes limits on the automatic observation of MI, BL and DR, so these descriptors are less reliable or absent in reports from automated stations.
Why it matters to pilots
Low drifting snow does not reduce visibility at eye level, but a pilot in the flare or on the take off roll is close to the ground. Snow moving across the runway at that height can hide markings and lights, in the same way that WMO-No. 782 warns shallow fog can. Blowing snow, dust or sand reduces visibility directly and can change quickly with the wind, so gusts in the wind group are worth reading together with the weather.
In real reports
The "In real reports" box on this page shows how often DR and BL appear in the METARs of the NOAA Aviation Weather Center sample collected for this site. Both are strongly seasonal for snow and regional for dust and sand, so a sample collected over a short period gives only a partial picture.
Method and limits
Definitions are taken from WMO-No. 782 (2025 edition), CAP 746 (sections 4.74 and 4.85), FMH-1 (2019), NWS Instruction 10-813 (October 2024) and the Transport Canada AIM MET section. The height threshold is 2 m in WMO, UK and Canadian texts and 6 feet in FMH-1; 6 feet is about 1.8 m. The rules on intensity differ between FMH-1 and CAP 746. The METAR line on this page is a schematic example built for this page, not a real report. The box counts the descriptors in the text of the METARs and does not separate human from automated stations.
Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).
Frequently asked questions
What does BLSN mean in a METAR?
BLSN is blowing snow: snow lifted by the wind to a height of 2 m or more, enough to reduce horizontal visibility. In FMH-1 the threshold is 6 feet. It describes snow raised from the ground, which may or may not be falling at the same time.
What is the difference between DRSN and BLSN?
The height of the snow in the air. WMO-No. 782 uses DR when the wind raises the snow less than 2 m above the ground, and BL when it is raised 2 m or more. DRSN does not reduce visibility at eye level; BLSN does.
What does SN BLSN mean?
It means snow is falling from cloud and snow on the ground is being blown at the same time. FMH-1 codes the two separately. When the observer cannot tell whether snow is also falling, only BLSN is reported.
Can blowing snow have an intensity?
FMH-1 states that no intensity is coded with BLDU, BLSA or BLSN in US reports. CAP 746 allows the intensity qualifier with blowing snow in the UK, so a report such as +BLSN may appear outside the United States.
Is drifting snow forecast in a TAF?
Yes. WMO-No. 782 lists low drifting snow among the phenomena that may be forecast in a TAF. Blowing snow, dust and sand can also be forecast because they reduce visibility.
Sources
- World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
- Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1, Surface Weather Observations and Reports (FCM-H1-2019)
- UK Civil Aviation Authority (2023). CAP 746, Requirements for Meteorological Observations at Aerodromes
- Transport Canada (2025). TC AIM, MET section