Additive data groups in a METAR remarks section

Tafrob editorial team · Updated · 6 min read

Short answer

Additive data groups are coded remarks that follow the sea level pressure in US METARs from designated stations, mostly for climatology. Examples are Prrrr for hourly precipitation, 6RRRR for 3- and 6-hour precipitation, 7RRRR for 24 hours, 4/sss for snow depth, 933RRR for snow water equivalent, 98mmm for sunshine and 5appp for pressure tendency.

Key points

  • Additive groups are reported at designated stations and are mainly used by the NWS for climatological purposes.
  • Most are coded numerically with a leading indicator: P, 6, 7, 4/, 933, 98, 8/, 5 and I.
  • Precipitation is in hundredths of an inch, snow depth in whole inches, and water equivalent of snow on the ground in tenths of an inch.
  • Each group has its own schedule: for example 7RRRR at 1200 UTC, 4/sss at 0000, 0600, 1200 and 1800 UTC, 933RRR at 1800 UTC.
  • Do not confuse a group's leading digit with the temperature groups that also start with 1, 2 or 4.
ASOS all-weather precipitation accumulation gauge standing in an open field at an airport
Photo: Famartin, CC BY-SA 3.0, via Wikimedia Commons

What are additive data groups?

Additive data groups are numeric remarks added to a METAR beyond the core observation, and they sit after the sea level pressure in the remarks section. The Aviation Weather Handbook says they are only reported at designated stations and are primarily used by the NWS for climatological purposes. Most have no direct impact on the aviation community. For where they sit among all remarks, see METAR remarks (RMK).

The Handbook's table of remarks order lists the sea level pressure as item 22 and the additive data items after it. Two of the groups have their own pages on this site: the T group and temperature extremes and the sea level pressure remark. This page covers the rest.

Which additive groups exist?

The groups below are the ones defined in FMH-1 chapter 12, each with its format and the unit it uses.

Group Name Unit or content
Prrrr Hourly precipitation amount Hundredths of an inch
6RRRR 3- and 6-hour precipitation amount Hundredths of an inch
7R24R24R24R24 24-hour precipitation amount Hundredths of an inch
4/sss Snow depth on ground Whole inches
933RRR Water equivalent of snow on ground Tenths of an inch
98mmm Duration of sunshine Minutes
8/CLCMCH Cloud types (low, middle, high) Cloud type digits
5appp 3-hourly pressure tendency Tenths of hectopascals
I1nnn, I3nnn, I6nnn Ice accretion Hundredths of an inch

FMH-1 defines the units of measure for precipitation in a table: liquid precipitation in 0.01 inch, the water equivalent of solid precipitation in 0.1 inch, and snow depth in 1.0 inch. The precipitation amount is the depth of liquid accumulated in an exposed vessel over the period. For freezing or frozen precipitation it is the water equivalent of the solid precipitation.

How do you read the precipitation groups?

Three groups carry precipitation, and the difference between them is the period and the schedule.

Prrrr, hourly. P is the indicator and rrrr is the water equivalent of all precipitation since the last METAR, in hundredths of an inch. FMH-1 gives P0009 as 9/100 of an inch and P0000 as less than 1/100 of an inch. The group is omitted if no precipitation occurred. FMH-1 assigns it to designated automated stations.

6RRRR, 3 and 6 hours. The amount accumulated in the past 3 hours is reported in the 3-hourly report, and the amount in the past 6 hours in the 6-hourly report. The digits are the tens, units, tenths and hundredths of an inch. FMH-1 codes 2.17 inches as 60217, a trace as 60000, and an indeterminable amount as 6////.

7R24R24R24R24, 24 hours. The 24-hour amount is included in the 1200 UTC report (or another agency-designated time) whenever more than a trace of water equivalent has fallen in the preceding 24 hours. FMH-1 codes 1.25 inches as 70125, and an amount that cannot be determined as 7////.

Reading a hypothetical remark string built for this page (not from a source):

RMK AO2 SLP132 P0012 60045 T00811056
  • P0012: 0.12 inch of precipitation in the last hour.
  • 60045: 0.45 inch in the past 3 or 6 hours, depending on the report time.
  • T00811056: temperature 8.1 C, dew point 5.6 C.

How do the snow groups work?

Two groups describe snow on the ground, and they are defined differently.

Group Meaning Example from FMH-1 Schedule in FMH-1
4/sss Snow depth, whole inches, three digits 4/021 is 21 inches 0000, 0600, 1200, 1800 UTC when more than a trace is on the ground
933RRR Water equivalent of snow, tenths of an inch 933036 is 3.6 inches; 933125 is 12.5 inches 1800 UTC, if the average snow depth is 2 inches or more

FMH-1 adds three conditions on 933RRR. The water equivalent counts snow, snow pellets, snow grains, ice pellets, ice crystals and hail on the ground. If it consists entirely of hail, the group is not coded. The value is never estimated: ratios such as 10 to 1 or temperature and snow water equivalent tables are not to be used.

Watch the leading characters. The depth group starts with 4/ (with a solidus) and is followed by three digits. The 24-hour temperature group also starts with 4, but it has nine characters and no solidus. See the T group page for that one.

What are 98mmm and 8/CLCMCH?

98mmm is the duration of sunshine on the previous calendar day, in minutes, coded in the 0800 UTC report. FMH-1 says that if the station is closed at 0800 UTC, the group is coded in the first 6-hourly METAR after the station opens. Its examples are 98096 for 96 minutes and 98000 for no sunshine.

8/CLCMCH reports the predominant low, middle and high cloud types in 3- and 6-hourly reports when clouds are observed. Types are identified in accordance with the WMO International Cloud Atlas. A 0 is coded for a level that has no cloud, and a solidus for layers above an overcast. If the sky is clear the group is not coded. FMH-1 decodes 8/6// as an overcast layer of stratus clouds, and 8/903 as cumulonimbus type low clouds, no middle clouds and dense cirrus high clouds. For how automated sensors measure cloud height in the body of the report, see the ceilometer page.

How do you read the 5appp pressure tendency?

The 5appp group describes how the station pressure changed over the past three hours. FMH-1 defines 5 as the indicator, a as the character of the change (a code figure from a table in FMH-1) and ppp as the amount in tenths of hectopascals using the tens, units and tenths digits. It gives 52032 as a steady increase of 3.2 hectopascals in the past three hours.

JO 7900.5E states the same example and adds that ppp is the absolute value of the change of either the station pressure or the altimeter setting in the past three hours. Because ppp is an absolute value, the sign of the change comes from the character digit a, not from ppp. Decode the character digit with the table in FMH-1, which is too long to reproduce without risking a misprint.

What are the ice accretion groups?

Ice accretion groups report the amount of ice that has accreted. FMH-1 requires them at designated stations with a SPECI-capable freezing rain sensor, whenever accretion is occurring or has occurred in the period. I1nnn is the hourly amount at designated automated stations, with nnn in hundredths of an inch: I1004 is 4/100 inch in the past hour. I3nnn and I6nnn are the 3- and 6-hour amounts, and I6023 is 23/100 inch in the past 6 hours.

They rely on a freezing rain sensor. When an equipped automated station reports that sensor as not working, the remark FZRANO is coded, as explained on the sensor status indicators page.

Common mistakes

  • Reading P0012 as 12 inches or 0.012 inch. The unit is hundredths of an inch, so it is 0.12 inch.
  • Mixing up 4/sss (snow depth, inches) with 933RRR (water equivalent, tenths of an inch).
  • Assuming every group is present in every METAR. Each group has its own schedule and its own conditions.
  • Applying these groups to non-US reports. They are defined in US handbooks cited on this page; check the national rules elsewhere.

This page is educational and is not a source for operational weather. For the whole report, see how to read a METAR.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does P0009 mean in a METAR?

P0009 is the hourly precipitation amount. The P is the group indicator and the four digits are hundredths of an inch of water equivalent since the last METAR. FMH-1 gives P0009 as 9/100 of an inch in the past hour, and P0000 as less than 1/100 of an inch. The group is omitted if no precipitation occurred.

What does 4/021 mean in a METAR remark?

4/021 is the snow depth on the ground. The 4/ is the indicator and sss is the depth in whole inches using three digits, so 021 is 21 inches. FMH-1 codes it in the 0000, 0600, 1200 and 1800 UTC observations whenever more than a trace of snow is on the ground.

What is the 5appp group?

5appp is the 3-hourly pressure tendency. The 5 is the indicator, a describes the character of the pressure change over three hours, and ppp is the amount in tenths of hectopascals. FMH-1 gives 52032 as a steady increase of 3.2 hectopascals over the past three hours.

Do pilots need to read these groups?

Rarely. The Aviation Weather Handbook says additive data groups are only reported at designated stations and are primarily used by the NWS for climatological purposes, and most have no direct impact on the aviation community. Still, knowing what they are helps when a long remarks section has to be read.

Sources

  1. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1 (FCM-H1-2019)
  2. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A)
  3. Federal Aviation Administration (2021). Order JO 7900.5E, Surface Weather Observing, Change 1