SG: snow grains in METAR and TAF

Tafrob editorial team · Updated · 6 min read

Short answer

SG is snow grains: very small, white, opaque particles of ice, fairly flat or elongated, generally less than 1 mm across. WMO-No. 782 and CAP 746 call them the frozen equivalent of drizzle, because they fall from layer cloud in the same way. SG takes an intensity sign (-SG, SG, +SG) but no SH or TS descriptor. It should not be confused with SN, GS or IC.

Key points

  • SG is snow grains: very small, white, opaque ice particles, generally under 1 mm.
  • WMO-No. 782 and CAP 746 describe snow grains as the frozen equivalent of drizzle.
  • Snow grains fall from stratiform or layer cloud, not from convective cloud.
  • NWS Instruction 10-813 allows -SG, SG and +SG in a TAF.
  • FMH-1 does not allow SH or TS with SG: SHSG and TSSG do not exist.
  • Snow pellets (GS) are larger, 2 to 5 mm, and come from cumuliform cloud.
Macro photograph of a single branched six-pointed snow crystal on a blue background
Photo: Alexey Kljatov, CC BY-SA 4.0, via Wikimedia Commons

The smallest solid precipitation

Snow grains are a form of frozen precipitation that is easy to miss. FMH-1 defines them as precipitation of very small, white and opaque grains of ice. WMO-No. 782 adds the shape and size: very small, opaque white particles of ice that are fairly flat or elongated, with a diameter generally less than 1 mm, falling from stratiform clouds. CAP 746 (section 4.97) uses almost the same words and says they fall from a layer cloud.

Both WMO-No. 782 and CAP 746 sum up snow grains in one phrase: the frozen equivalent of drizzle. The comparison is useful for decoding. Drizzle is very fine liquid precipitation from low, shallow cloud; snow grains are its solid counterpart. The DZ drizzle page explains the liquid version.

The image on this page shows a single branched snow crystal, which is what snow grains are not. Snow crystals are branched six-pointed stars; snow grains are small opaque particles with no visible branches.

How SG is coded

SG is a precipitation code in the present weather group. FMH-1 lists it among the precipitation types with DZ, RA, SN, IC, PL, GR and GS. NWS Instruction 10-813 gives the three intensities for a TAF:

Code Meaning
-SG Light snow grains
SG Moderate snow grains
+SG Heavy snow grains

The sign follows the general rules on the intensity and vicinity page. FMH-1 states that intensity is coded with all precipitation types except ice crystals, hail and unknown precipitation, so SG takes a sign.

FMH-1 does not give a specific intensity table for snow grains. Its Tables 8-1 to 8-4 cover rain, ice pellets, snow, snow pellets and drizzle. It does give a general rule: when more than one form of precipitation is occurring, or precipitation occurs with an obscuration, the intensity determined is no greater than it would be if each form were occurring alone.

No showers, no thunderstorms

Snow grains come from layer cloud, and the code reflects it. FMH-1 allows the SH descriptor only with rain, snow, ice pellets, snow pellets and hail, and the TS descriptor with the same types. As a result:

  • SHSG does not exist;
  • TSSG does not exist;
  • small ice from a convective cloud is coded GS, snow pellets, or GR, hail, not SG.

The same split is found in the drizzle and rain pair: drizzle has no shower form either, while rain does.

SG and the other frozen codes

Five codes describe frozen precipitation, and the differences are in the size, the shape and the cloud.

Code Name Size and look Typical cloud
SN Snow Branched six-pointed crystals, often in flakes Layer or convective
SG Snow grains Opaque white, flat or elongated, generally under 1 mm Layer cloud
GS Snow pellets or small hail Snow pellets white, opaque, about round, 2 to 5 mm Cumuliform
PL Ice pellets Transparent or translucent, 5 mm or less Layer cloud, with a warm layer aloft
IC Ice crystals Unbranched needles, columns or plates Not stated in FMH-1

The table is assembled from FMH-1, WMO-No. 782 and CAP 746. Each neighbour has its own page:

  • Snow. The crystals are branched and often stick together into flakes; see the SN snow page.
  • Snow pellets. CAP 746 (section 4.98) describes white, opaque, approximately round ice particles from cumuliform cloud, often with snow, at temperatures near 0 °C, usually 2 to 5 mm across. They are larger, rounder and come from a different cloud. GS is decoded on the GR and GS hail page.
  • Ice pellets and ice crystals. Ice pellets are hard and translucent, and ice crystals are unbranched; both are on the PL and IC page.

Recognising snow grains

The observer relies on what reaches the ground. The definitions give the clues:

  1. Size. The particles are very small, generally less than 1 mm.
  2. Colour. They are white and opaque, unlike ice pellets, which are transparent or translucent.
  3. Shape. They are fairly flat or elongated, unlike snow pellets, which are about round.
  4. Sky. They fall from a low layer cloud, not from towering cumulus or cumulonimbus.

Because the grains are so small, they usually fall in small quantities. The sources consulted here do not give an amount or a frequency for snow grains, and no statement about how common they are is made on this page.

A schematic report

A schematic line shows snow grains under a low overcast:

METAR EGXX 120650Z 04006KT 4000 -SG BR OVC006 M02/M03 Q1022

It reads: wind from 040 degrees at 6 knots, visibility 4000 m, light snow grains and mist, overcast at 600 feet, temperature minus 2 °C, dew point minus 3 °C. The pattern mirrors a drizzle report, with a low layer and saturated air, but below freezing.

Mixed groups

Snow grains can share a group with other precipitation. FMH-1 allows up to three types per group, coded in order of decreasing dominance, under one intensity sign. A group such as -SNSG would mean light snow and snow grains with snow dominant. NWS Instruction 10-813 does not list an example with SG in a mixed group, and none is quoted from the sources here.

Snow grains in remarks and recent weather

At designated US stations, FMH-1 requires the beginning and ending times of precipitation in the remarks section, with the type of precipitation first and no intensity sign. A remark such as SGB12E40 would mean that snow grains began at 12 minutes past the hour and ended at 40.

CAP 746 includes moderate or heavy snow grains in its list of recent weather entries, which gives RESG. The recent weather page explains the RE group.

In real reports

The "In real reports" box on this page shows the share of METARs in the NOAA Aviation Weather Center sample collected for this site that contain SG. The count depends on the season and on the stations where cold, shallow layer cloud was present during the collection period.

Method and limits

Definitions are taken from FMH-1 (2019, chapter 8 and the coding rules of chapter 12), WMO-No. 782 (2025 edition), CAP 746 (sections 4.97 and 4.98, recent weather list) and NWS Instruction 10-813 (October 2024, Appendix B). The FAA AIM lists SG among the precipitation codes without further detail. No specific intensity criteria for snow grains were found in FMH-1, WMO-No. 782 or CAP 746. The CAP 746 recent weather table is misaligned in the text extraction of the PDF used here; RESG is read from the row naming moderate or heavy snow grains and should be checked against the printed table. The comparison table combines definitions from several sources; IC is described only by FMH-1 and the FAA AIM. The EGXX line, -SNSG and SGB12E40 are schematic examples built from the coding rules, not real reports. The image shows a snow crystal for contrast, not snow grains, because no freely licensed photograph of snow grains of sufficient size was found on Wikimedia Commons.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does SG mean in a METAR?

SG means snow grains: very small, white, opaque grains of ice, generally less than 1 mm in diameter, falling from layer cloud. A minus sign gives light snow grains (-SG) and a plus sign heavy snow grains (+SG).

Why are snow grains called frozen drizzle?

WMO-No. 782 and CAP 746 both describe snow grains as the frozen equivalent of drizzle. Like drizzle, they are very small and fall from low stratiform or layer cloud, but they are ice rather than liquid water.

What is the difference between SG and GS?

Snow grains (SG) are flat or elongated and generally under 1 mm, falling from layer cloud. Snow pellets (GS) are roughly round, 2 to 5 mm, crisp and easily crushed, and fall from cumuliform cloud, often with snow and near 0 °C.

What is the difference between SG and IC?

Snow grains are opaque white grains. Ice crystals (IC), also called diamond dust, are unbranched crystals in the form of needles, columns or plates, according to FMH-1. IC never takes an intensity sign, while SG does.

Can SG appear with SH or TS?

No. FMH-1 allows the shower descriptor only with rain, snow, ice pellets, snow pellets and hail, and the thunderstorm descriptor with the same types. Snow grains come from layer cloud, so neither descriptor applies.

Sources

  1. World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
  2. UK Civil Aviation Authority (2023). CAP 746, Requirements for Meteorological Observations at Aerodromes
  3. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1, Surface Weather Observations and Reports (FCM-H1-2019)
  4. National Weather Service (2024). NWS Instruction 10-813, Terminal Aerodrome Forecasts (October 30, 2024), Appendix B
  5. Federal Aviation Administration. Aeronautical Information Manual, chapter 7, section 1