Units in METAR by country: knots, m/s, hPa, inHg and miles

Tafrob editorial team · Updated · 9 min read

Short answer

A METAR states wind in knots or metres per second, visibility in metres, kilometers or statute miles, and pressure in hectopascals or inches of mercury, depending on the country. ICAO international practice uses Q for hectopascals; the United States and Canada use statute miles and an A group in inches of mercury. The table counts the units actually found in each region.

Key points

  • Wind is written as a five-digit group followed by KT or MPS, so the suffix tells the unit.
  • Pressure uses the letter Q for hectopascals and the letter A for inches of mercury, always four digits.
  • Visibility in metres (such as 9999) is the international form; the United States and Canada use statute miles followed by SM.
  • Cloud heights are in feet in the sources read for this page, in hundreds of feet in the United States.
  • The table on this page counts units in a data sample by the first letter of the station code, so it describes usage in that sample, not national law.
Sonic anemometer on a pole with red lights against a blue sky at an airport weather station
Photo: Famartin, CC BY-SA 4.0, via Wikimedia Commons

Dataset: 121,001 METARs from 5,526 stations and 12,960 TAFs, NOAA Aviation Weather Center, 18 November 2026 to 19 November 2026. Generated 2026-11-19.

Units used in METARs by ICAO region prefix
PrefixRegionMETARKTMPSA (inHg)Q (hPa)SM
KContiguous United States55,81298.4%0%99.6%0%96.7%
LSouthern Europe, Israel, Turkey12,80999.7%0%0%99.7%0%
ENorthern Europe12,136100%0%2%97.6%0%
CCanada8,76298.3%0%48.6%0%47.8%
SSouth America4,99298.9%0%0%99.1%0%
URussia and former USSR4,21724.1%75.9%0%100%0%
PAlaska, Hawaii and US Pacific3,86497.9%0%98.2%0.4%97.1%
VSouth and Southeast Asia (V)3,327100%0%0.2%100%0%
RJapan, Korea, Philippines, Taiwan1,86299.7%0%8.9%91.1%7.1%
MMexico, Central America, Caribbean (M)1,80899.8%0%70.1%40.7%48.2%
OMiddle East, Pakistan, Afghanistan1,66399.9%0%6.2%97.7%0%
FSouthern and Central Africa1,46593.7%0%1%96.6%0%
GWest Africa and Atlantic islands (G)1,26499.9%0%0%99.7%0%
YAustralia1,230100%0%0%100%0%
DWest Africa (D)1,125100%0%0%99.4%0%
WMaritime Southeast Asia1,10399.9%0%0%100%0%
NSouth Pacific and New Zealand1,07499.6%0%3.7%94.4%1.7%
ZChina, Mongolia, North Korea7970%100%0%100%0%
HEast and North-East Africa76999.6%0%0%93%0%
TEastern Caribbean515100%0%25.8%74%25.8%
BIceland, Greenland, Kosovo384100%0%4.9%95.1%0%
AWestern South Pacific23100%0%0%100%0%

Which units does a METAR use?

A METAR uses different units for different elements, and the unit depends on the country that issues the report. Wind speed is in knots or metres per second, visibility is in metres, kilometers or statute miles, the altimeter setting is in hectopascals or inches of mercury, and cloud heights are in feet. Temperature and dew point are in whole degrees Celsius in both systems. The unit is always written in the report itself, as a suffix or a letter, so a decoder never has to guess.

Behind these differences are two reference documents. ICAO Annex 5 sets the units for international air and ground operations, and national authorities then publish their own rules for observations. The sources read for this page are listed at the end, with the ones that were not read. For the full coding of each group, start from how to read a METAR.

What does the international standard say?

The international standard lists the International System of Units as primary and allows a few non-SI units to remain in use. The UK Civil Aviation Authority publication CAP 2264 reproduces that basis for the United Kingdom, which follows ICAO Annex 5. In its table, altitude, elevation and height are in metres with the foot as the non-SI alternative, visibility is in kilometers (and in metres below 5 km), runway visual range is in metres, wind speed is in metres per second with the knot as the alternative, and pressure and altimeter setting are in hectopascals.

The same publication states the conversion values used in the ICAO Annexes: one foot is 0.3048 metre, one knot is one nautical mile per hour, one nautical mile is 1852 metres, and one knot is taken as 0.5 metre per second for the conversion. It also notes that the knot and the foot are non-SI units used without a termination date. This explains why an international METAR can show knots even though the primary unit is the metre per second. The wind group page explains the format in detail: wind group.

What does a METAR written to the WMO code look like?

A METAR written to the WMO code of Annex 3 follows the layout described in WMO-No. 782. The wind is a five-digit group, three digits for direction and two or more for speed, followed by KT or MPS. A gust is reported when the speed exceeds the mean speed by 10 knots or 5 metres per second. Variable direction is written VRB when the speed is below 3 knots (1.5 metres per second), and calm is written 00000 when the speed is below 1 knot (0.5 metre per second). A speed of 100 knots or more is written P99KT, and 50 metres per second or more is written P49MPS.

Visibility is written in metres, in steps of 50 metres up to 500 metres, 100 metres up to 5000 metres, 1000 metres up to 10 kilometers, and 9999 for 10 kilometers or more. Runway visual range is in metres. The QNH is in whole hectopascals, rounded down, with the letter Q. WMO-No. 782 adds, in a note, that some countries use inches of mercury and then use the letter A, with the example A3005. See visibility and QNH and altimeter setting for the groups themselves.

What does the United States publish?

The United States publishes its own rules in the Federal Meteorological Handbook No. 1 (FMH-1). Wind is in knots. Visibility is in statute miles, with the values given in a table, and fractions such as 1/2SM or 1 1/4SM. The altimeter setting is in inches of mercury, rounded down to the hundredth, and written with the letter A and four digits. Runway visual range is in feet. Layer heights are in hundreds of feet above ground level. Temperature and dew point are in whole degrees Celsius.

For this reason a US report differs from an international one in several places at once. The page on US and ICAO METAR differences describes them side by side.

What do Canada and the United Kingdom publish?

Canada follows a form close to the American one. The NAV CANADA Aviation Weather Services Guide (2017 edition) describes METARs with wind in knots as a two-minute mean, visibility in statute miles with fractions, runway visual range in feet written with FT, the altimeter setting in inches of mercury with the letter A, and cloud heights in feet. The guide is a NAV CANADA publication, not a regulation.

The United Kingdom follows the international form. The UK CAA publication CAP 746 (Issue 6) describes wind in knots and a QNH in whole hectopascals with the letter Q. So a report from a UK station and a report from a US station have the same layout but not the same units. The page on US versus ICAO differences covers the rest.

How do the main units compare across regions?

The table below summarizes the units found in the sources read for this page. It describes publications, not every country: the sources cover ICAO practice through WMO-No. 782 and CAP 2264, the United States through FMH-1, Canada through the NAV CANADA guide and the United Kingdom through CAP 746.

Element ICAO practice (WMO-No. 782) United States (FMH-1) Canada (NAV CANADA)
Wind speed KT or MPS Knots Knots
Visibility Metres, 9999 for 10 km or more Statute miles with SM Statute miles with SM
Runway visual range Metres Feet Feet with FT
Altimeter setting Q group in whole hPa; A group where inches are used A group in inHg A group in inHg
Cloud height Feet Hundreds of feet Feet
Temperature Whole degrees Celsius Whole degrees Celsius Not checked in the sources read

The wind speed unit is the one that varies most inside the international system, because the code allows both knots and metres per second. For the conversion between pressure units, a tool is available: the pressure converter.

What does the table on this page measure?

The table counts, for each region prefix, the reports of the sample that use a given unit. The prefix is the first letter of the station identifier found at the start of the raw report text, matched against a lookup table of 22 prefixes. For each region, the table shows the number of reports and then the percentage of those reports that contain each indicator.

Each column has its own definition, applied to the report body (the text before RMK):

  • KT: a digit immediately followed by KT and a space.
  • MPS: a digit immediately followed by MPS and a space.
  • A (inHg): a space, the letter A and four digits, followed by a space or the end of the text.
  • Q (hPa): a space, the letter Q and four digits, followed by a space or the end of the text.
  • SM: statute miles, with an optional P or M prefix, digits, an optional fraction and SM.

The percentage is the count divided by the number of reports of that region. The percentages of KT and MPS are not forced to add up to 100 percent, because some reports have a calm wind or no wind group. The rows are sorted by number of reports. The column for metres is not shown: international visibility in metres is represented in the METAR statistics page by the 9999 row, described on the METAR statistics page.

How should the table be read?

The table should be read as the observed mix of units in a sample, with three precautions:

  1. A prefix is not a country. The letter E, for example, covers several countries, and the letter K covers the contiguous United States.
  2. A region that shows both Q and A is a region where stations differ. The table cannot say which station uses which unit.
  3. A low count means a fragile percentage. A prefix with few reports can swing widely from one collection to the next.

A schematic report

Two fictitious reports show the differences in one place. The station codes are real, the values are not.

METAR KJFK 191851Z 28012G22KT 10SM FEW035 BKN250 08/M02 A3012
METAR EGLL 191850Z 24008KT 9999 SCT040 12/06 Q1018 NOSIG

In the first report the unit markers are KT, SM and the letter A, so wind is in knots, visibility in statute miles and the altimeter setting in inches of mercury (30.12 inHg). In the second, they are KT, the four digits 9999 and the letter Q, so wind is in knots, visibility is 10 km or more, and QNH is 1018 hectopascals. A report with MPS in the wind group would be written, for example, 20005MPS. The QNH page explains the pressure groups in detail.

In real reports

In real reports, the combinations follow the pattern of the sources above: statute miles together with the A group in the North American reports read for this page, and metres together with the Q group in the international ones. WMO-No. 782 states that the wind group may end with KT or MPS, and also that some countries use inches of mercury. Those two points mean that exceptions exist and that the suffix must be read each time.

Some reports mix systems, for example a station that reports wind in metres per second and pressure in hectopascals, or a military report that follows national rules. No part of this page claims to list which country uses which unit. The table in the dataset shows what is found in the sample, and the legal rule is in the national aeronautical information publication of each country.

Method and limits

This section states what was read, what was not read, and how the table is built.

  • Read for this page: WMO-No. 782 (2025 edition) for the international code, FMH-1 (2019) for US practice, UK CAA CAP 746 (Issue 6) and CAP 2264 (first issue, 2021) for UK practice and the unit basis of ICAO Annex 5, and the NAV CANADA Aviation Weather Services Guide (2017). The Aviation Weather Center data API page was read for the cache files.
  • Not read: the full text of ICAO Annex 5 and Annex 3, WMO-No. 306, and the national aeronautical information publications of most countries, including Russia, China, Japan and Australia. The Canadian Aeronautical Information Manual was not used for the units. Usage of metres per second in some countries is visible in the dataset but is not backed here by an official document: only the WMO text, which allows KT or MPS, is cited.
  • Table: the region is taken from the first letter of the station identifier in the raw text, with 22 prefixes. Each unit is detected by a text pattern on the report body, and the sample is a set of hourly snapshots of the NOAA cache, with identical report texts counted once.
  • Limits: the sample leans toward North America, routine and special reports are mixed, and a one-letter prefix is approximate. Patterns can miss unusual formats or match unexpected ones. The percentages are descriptive and not an operational source.

This page does not replace a national publication. For an operational decision, read the current official sources of the authority that applies.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

How can I tell the unit of the wind in a METAR?

Read the end of the wind group. A five-digit group such as 24012 is followed by KT for knots or MPS for metres per second. WMO-No. 782 states that the group ends with one of these two indicators. A value of 100 knots or more is written P99KT, and 50 metres per second or more is written P49MPS.

Why do some reports use A3012 and others Q1018?

They are two ways to write the altimeter setting. The letter Q introduces a QNH in whole hectopascals, which is the ICAO standard. The letter A introduces a setting in inches of mercury with an implied decimal point, so A3012 means 30.12 inHg. The United States and Canada use the A group in their METARs.

Is visibility in a METAR always in metres?

No. International reports give visibility in metres, with 9999 meaning 10 km or more, while the United States and Canada give it in statute miles followed by SM, with fractions such as 1/2SM. The unit is part of the group, so the suffix SM or the four digits tell which system is used.

Do the percentages in the table show national rules?

No. The table counts what appears in a sample of reports, grouped by the first letter of the station code. A region with mixed practice shows mixed percentages, and a region with few stations in the sample can show an unrepresentative result. For the rule of a given country, read its aeronautical information publication.

Sources

  1. World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
  2. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1, Surface Weather Observations and Reports (FCM-H1-2019)
  3. UK Civil Aviation Authority (2023). CAP 746 Requirements for meteorological observations at aerodromes, Issue 6
  4. UK Civil Aviation Authority (2021). CAP 2264 Units of Measurements in Civil Aviation
  5. NAV CANADA (2017). Aviation Weather Services Guide
  6. NOAA Aviation Weather Center. Data API and cache files (METAR, TAF and other products)