FEW, SCT, BKN and OVC: cloud cover codes in METAR and TAF

Tafrob editorial team · Updated · 5 min read

Short answer

FEW, SCT, BKN and OVC give the amount of sky covered by a cloud layer, in eighths of the sky called oktas. FEW is 1 to 2 oktas, SCT 3 to 4, BKN 5 to 7 and OVC 8. Each code is followed by the height of the layer base in hundreds of feet, so BKN025 is a broken layer at 2,500 feet above the aerodrome.

Key points

  • FEW is 1 to 2 oktas, SCT 3 to 4 oktas, BKN 5 to 7 oktas and OVC 8 oktas of sky cover.
  • The three digits after the code give the base height in hundreds of feet above the aerodrome.
  • WMO-No. 782 normally limits the report to three layers, plus any CB or TCU not already included.
  • Groups are written in order of increasing height, the lowest layer first.
  • US rules add the amounts of lower layers to the layers above them, up to six layers.
  • The lowest BKN or OVC layer usually defines the ceiling.
Small scattered clouds lit pink by the setting sun over a line of trees, with most of the sky clear
Photo: Unknown authorUnknown author, CC0, via Wikimedia Commons

Four words for the amount of cloud

The cloud group is one of the longest parts of a METAR, and most of it is built from four codes. Each one gives how much of the sky a layer covers, measured in oktas, or eighths of the sky. The code is followed by three digits for the height of the base, and sometimes by a cloud type.

Code Meaning
FEW Few: 1 to 2 oktas
SCT Scattered: 3 to 4 oktas
BKN Broken: 5 to 7 oktas
OVC Overcast: 8 oktas
SCT018 Scattered layer with its base at 1,800 feet
BKN025CB Broken cumulonimbus layer at 2,500 feet

The okta ranges

WMO-No. 782 gives the four ranges used worldwide: FEW for 1 to 2 oktas, SCT for 3 to 4, BKN for 5 to 7 and OVC for 8. CAP 746 uses the same ranges. The steps are deliberately coarse: an observer estimates the cover by eye, and an automatic system estimates it from the time history of a sensor pointed straight up.

The amount refers to one layer, not to the whole sky. A report can show FEW at one height and OVC at another, and the observer estimates the amount of each layer as it would appear if the layers below it were not there. US rules add one step, explained below.

A sky with no cloud at all has its own codes, SKC, CLR, NSC and NCD, explained on the SKC, CLR, NSC and NCD page.

The height digits

The three digits give the height of the base above the aerodrome in units of 100 feet (30 m). WMO-No. 782 uses steps of 100 feet up to 10,000 feet and steps of 1,000 feet above that. Heights are rounded down: the WMO example is a layer of 3 oktas at 1,850 feet, reported as SCT018. CAP 746 follows the WMO rule.

FMH-1 uses finer steps at mid levels: 100 feet up to 5,000 feet, 500 feet up to 10,000 feet and 1,000 feet above that. A layer at 50 feet or less is reported as 000. The details of height coding and of the differences between rule sets are on the cloud height page.

Which layers are reported

Under WMO and UK rules, a METAR does not list every layer. WMO-No. 782 and CAP 746 (section 4.103) normally report up to three groups:

  • the lowest layer, whatever its amount;
  • the next higher layer covering more than 2 oktas, so SCT or more;
  • the next higher layer covering more than 4 oktas, so BKN or OVC.

Cumulonimbus and towering cumulus are added when they are not already part of those groups. All groups are written in order of increasing height. The WMO example FEW005 FEW010CB SCT018 BKN025 shows 1 okta at 500 feet, 2 oktas of cumulonimbus at 1,000 feet, 3 oktas at 1,800 feet and 5 oktas at 2,500 feet: the CB layer appears even though a FEW layer would not otherwise qualify as the second group.

The US summation rule

FMH-1 works differently. Each layer is reported with the total amount of sky covered at and below its height, so the amount of a layer includes the layers beneath it. A sky with 2 oktas at 1,000 feet and another 2 oktas at 3,000 feet gives FEW010 SCT030, because 4 oktas in total are covered at 3,000 feet. Up to six layers can be reported.

The result is that a US report can show BKN or OVC for an upper layer that would look thin if seen alone. This matters for the ceiling, because the lowest layer that reaches BKN by summation becomes the ceiling. The full definition is on the ceiling page.

Cloud type after the height

Only two cloud types are written in the main group: CB for cumulonimbus and TCU for towering cumulus. WMO-No. 782 and CAP 746 state that no other type is reported there. The type follows the height with no space, as in SCT055CB or BKN013TCU. When the two share a common base, CAP 746 (section 4.108) reports one group with the type CB and the amount of both together. The two types are explained on the CB and TCU page.

Automatic stations that cannot identify the type put three slashes in its place, as in BKN050///. US automated stations do not report a type at all.

Missing values

Slashes mark what could not be observed. WMO-No. 782 lists the forms: BKN////// when the base is unknown, ///030 when the amount is unknown, and ////// when nothing is known. Stations in mountains can have cloud below the station level; FMH-1 replaces the height of such a layer with ///.

When the sky is hidden by fog or snow, the cloud group is replaced by a vertical visibility, as in VV003. That case is covered on the vertical visibility page.

Cloud cover in a TAF

A TAF uses the same codes and the same rules for layers. WMO-No. 782 adds that cumulonimbus is always included when it is forecast. Changes in cloud cover are one of the reasons for a change group: the WMO criteria include a lowest BKN or OVC layer whose base reaches or passes 100, 200, 500 or 1,000 feet, and a layer below 1,500 feet changing from NSC, FEW or SCT to BKN or OVC, or the reverse.

When the visibility is 10 km or more and there is no cloud of operational significance and no significant weather, the whole group is replaced by CAVOK, explained on the CAVOK page.

A schematic report

METAR LXXX 191050Z 22012KT 9999 FEW008 SCT022 BKN045 14/09 Q1015

It reads: wind from 220 degrees at 12 knots, visibility 10 km or more, few clouds at 800 feet, scattered at 2,200 feet, broken at 4,500 feet. The three layers match the WMO sequence: the lowest of any amount, then more than 2 oktas, then more than 4 oktas. The broken layer at 4,500 feet is the lowest BKN layer.

In real reports

The "In real reports" box on this page shows the share of METARs in the NOAA Aviation Weather Center sample collected for this site that contain FEW, SCT, BKN or OVC. These are among the most common groups in any report, so the shares are high and change with the season and the time of day.

Method and limits

Definitions and rules are taken from WMO-No. 782 (2025 edition, cloud group, layer selection, missing data and TAF change criteria), CAP 746 (sections 4.102 to 4.111), FMH-1 (2019, sky condition rules) and the FAA AIM, chapter 7, section 1. The summation example with 2 and 4 oktas is an illustration of the FMH-1 rule, not a quoted example. The LXXX line is a schematic example, not a real report. The image shows small scattered clouds at sunset; it is not linked to a specific report. The box counts each code in the text of the METARs, so a report with several layers can count for several codes.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does BKN mean in a METAR?

BKN means broken: a cloud layer covering 5 to 7 oktas, or eighths, of the sky. It is followed by the base height in hundreds of feet, so BKN012 is a broken layer at 1,200 feet above the aerodrome. In US rules the lowest BKN or OVC layer is the ceiling.

What is an okta?

An okta is one eighth of the sky. Cloud amount in a METAR is estimated in oktas: FEW covers 1 to 2, SCT 3 to 4, BKN 5 to 7 and OVC all 8. A sky with no cloud at all is 0 oktas and is reported with other codes.

Why does a METAR show only three cloud layers?

WMO-No. 782 and CAP 746 normally report the lowest layer of any amount, the next layer of more than 2 oktas and the next higher layer of more than 4 oktas. CB or TCU layers are added if they are not already included. US rules allow up to six layers.

Is the cloud height above sea level?

No. In a METAR and a TAF the cloud height is above the aerodrome or the ground. The FAA AIM notes that pilot reports give heights above mean sea level, and that area forecasts also use mean sea level, so the reference depends on the product.

What do slashes in a cloud group mean?

Slashes replace a part that could not be observed. WMO-No. 782 shows BKN////// when the base is unknown and ///030 when the amount is unknown. Six slashes, //////, mean that nothing about the layer could be observed, usually because an automatic sensor failed.

Sources

  1. World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
  2. UK Civil Aviation Authority (2023). CAP 746, Requirements for Meteorological Observations at Aerodromes
  3. Office of the Federal Coordinator for Meteorology (2019). Federal Meteorological Handbook No. 1, Surface Weather Observations and Reports (FCM-H1-2019)
  4. Federal Aviation Administration. Aeronautical Information Manual, chapter 7, section 1