TX and TN in a TAF: the maximum and minimum temperature groups

Tafrob editorial team · Updated · 5 min read

Short answer

TX and TN give the forecast maximum and minimum temperatures in a TAF, in whole degrees Celsius, each with the day and hour UTC it is expected. TX25/1013Z means a maximum of 25 degrees at 1300 UTC on the 10th. An M marks values below zero. The group is optional: WMO treats it as a regional form, and NWS civil TAFs do not use it.

Key points

  • TX is the forecast maximum temperature, TN the forecast minimum, both in whole degrees Celsius.
  • After the slash come the day and hour UTC of the expected value, then Z.
  • M before the figures means minus: TNM02 is minus 2 degrees.
  • The group follows the cloud group of the opening line, before any change group.
  • It is optional: used by agreement in Europe and on military TAFs, not by NWS civil offices.
An automatic weather station and Stevenson screen at Wagga Wagga Airport
Photo: Bidgee, CC BY-SA 3.0 au, via Wikimedia Commons

What the group says

Most of a TAF deals with wind, visibility, weather and cloud. Temperature is not a required element. Some forecasters add it anyway, as a pair of groups giving the expected maximum and minimum temperature during the validity period, each with the time it is expected.

  • TX introduces the maximum temperature.
  • TN introduces the minimum temperature.

Both are written in whole degrees Celsius. The pillar page on reading a TAF shows where the group sits among the other elements, and the validity period page explains the day and hour format it shares with the rest of the forecast.

Format

Regulation (EU) 2017/373 sets out the group in its TAF template with two example pairs:

TX25/1013Z TN09/1005Z
TX05/2112Z TNM02/2103Z

Each group has four parts:

Part Example Meaning
Indicator TX or TN Maximum or minimum temperature
Value 25, 09, M02 Whole degrees Celsius, two digits, M for minus
Slash / Separator
Time 1013Z Day of the month (10) and hour UTC (13), then Z

The first pair reads: a maximum of 25 degrees Celsius at 1300 UTC on the 10th, and a minimum of 9 degrees at 0500 UTC on the 10th. The second reads: a maximum of 5 degrees at 1200 UTC on the 21st, and a minimum of minus 2 degrees at 0300 UTC on the 21st.

The M prefix is the same convention used in the METAR temperature group, explained on the temperature and dew point page. TNM02 is minus 2, not 2.

The time has no minutes. It gives the day and the hour at which the forecaster expects the extreme value, which places it inside the TAF validity period.

Where the group sits

In the EU template, temperature is listed after the cloud element and before the change groups. The WMO-No. 782 complete code format shows the same position: the TX and TN pair comes after the cloud group, in brackets, before the first PROB, BECMG, TEMPO or FM group. A TAF with the group therefore looks like this in outline:

TAF ICAO DDHHMMZ DDHH/DDHH wind visibility weather cloud TXnn/DDHHZ TNnn/DDHHZ
      change groups ...

The EU template marks temperature as optional, and a footnote limits it to "up to a maximum of four temperatures (two maximum temperatures and two minimum temperatures)". This matters for a long TAF. A forecast valid for 24 or 30 hours can cover two afternoons or two nights, so the forecaster can give a maximum and a minimum for each.

Military practice places the group differently. The Aviation Weather Handbook prints this line for a joint use airport:

BECMG 0511/0512 16005KT 9999 NSW SKC QNH3006INS TX28/0420Z TN22/0410Z

Here the group closes a BECMG line, after the lowest altimeter setting forecast QNH3006INS. It reads: a maximum of 28 degrees at 2000 UTC on the 4th and a minimum of 22 degrees at 1000 UTC on the 4th. The military TAF page covers the other military groups, including icing, turbulence and QNH.

Who uses it

The group is optional everywhere in the sources cited here, and its use varies by region.

WMO. WMO-No. 782 lists the group under "Regional code forms" and says it "is used only if agreed regionally and is included here for the sake of completeness". The full specification is in the WMO Manual on Codes (WMO-No. 306). The decode in WMO-No. 782 describes TX and TN as the indicators of maximum and minimum forecast temperature, followed by the date and time UTC to which each value refers.

European Union. Regulation (EU) 2017/373 includes temperature in the TAF template as an optional element, with the format and limits above.

United States, civil. NWS Instruction 10-813, Appendix E2, lists the temperature group, with the icing, turbulence and altimeter groups, among "Optional Groups" not used in NWS TAFs, and states that "There is no requirement for NWS WFOs to use these groups in NWS TAFs."

United States, joint civil and military airports. The Aviation Weather Handbook explains that TAFs at some joint use airports differ from the NWS format: visibility in metres, a forecast of the lowest altimeter setting, and maximum and minimum temperatures in whole degrees Celsius with their expected times.

The Transport Canada AIM and the Met Office GetMet leaflet, used elsewhere on this site, do not describe the group. Readers of Canadian and UK TAFs should not expect it.

The "In real reports" box on this page gives the share of TAFs in the collected sample that carry a TX group. It is computed from the NOAA Aviation Weather Center feed and updated with the site data.

Reading it in practice

Check the day as well as the hour. A TAF issued in the evening can give a minimum at 0500 UTC the next day and a maximum at 1400 UTC the same day. The two digits before the hour say which day.

Remember the time is UTC. A maximum at 1300 UTC is an early afternoon value in western Europe but a morning value in the Americas. Convert before comparing with local experience.

Do not read TX and TN as observations. They are forecasts of the extreme values for the period, not the temperature at the time of issue. The current temperature comes from the latest METAR.

Do not expect the group in every TAF. Its absence says nothing about the weather. It only means the issuing office does not include it.

Watch for the M. A missing M changes the sign. TNM02 and TN02 are four degrees apart, and the difference matters around freezing.

The TAF decoder recognises TX and TN groups and shows the value and time on separate lines.

Method and limits

The format and examples are quoted from Regulation (EU) 2017/373, WMO-No. 782 (2025 edition), NWS Instruction 10-813 (October 2024) and the Aviation Weather Handbook. The outline TAF line is a schematic built for this page, not a real forecast. The WMO Manual on Codes (WMO-No. 306), which holds the full regional specification, was not consulted directly. Which national services outside Europe and US military airports use the group was not surveyed.

Training and reference only. For flight planning, always use official briefing sources (your national weather service, AIS or approved provider).

Frequently asked questions

What does TX mean in a TAF?

TX introduces the forecast maximum temperature. It is followed by the value in whole degrees Celsius, a slash, the day and hour UTC at which the maximum is expected, and Z. TX25/1013Z means a maximum of 25 degrees at 1300 UTC on the 10th.

How is a negative temperature written in TX or TN?

With the letter M before the figures, the same convention as a METAR temperature group. Regulation (EU) 2017/373 gives TNM02/2103Z as an example, which means a minimum of minus 2 degrees Celsius at 0300 UTC on the 21st.

Why do US TAFs not have TX and TN?

NWS Instruction 10-813 lists the temperature group among optional groups not used in NWS TAFs and states that there is no requirement for NWS offices to use it. The Aviation Weather Handbook shows the group only in TAFs for joint civilian and military airports.

Can a TAF have more than one TX or TN?

Yes, in the EU template. Regulation (EU) 2017/373 allows up to four temperatures, two maximum and two minimum. A 30 hour TAF can span two afternoons or two nights, so two values of the same kind can both fall inside its validity.

Sources

  1. European Union (EUR-Lex) (2017). Commission Implementing Regulation (EU) 2017/373, Annex V (Part-MET), TAF template
  2. World Meteorological Organization (2025). Aerodrome Reports and Forecasts: A Users' Handbook to the Codes (WMO-No. 782), 2025 edition
  3. National Weather Service (2024). NWS Instruction 10-813, Terminal Aerodrome Forecasts (October 30, 2024)
  4. Federal Aviation Administration (2024). Aviation Weather Handbook (FAA-H-8083-28A), section 27.3.2.10.4