# Tafrob > Independent, source-first reference on aviation weather codes: every METAR and TAF group, present weather codes, cloud codes, SIGMET/AIRMET/PIREP and other reports, free open-source decoders and calculators, and original statistics computed from public NOAA data. Sources: ICAO Annex 3, WMO-No. 306, FAA JO 7900.5, FMH-1, FAA AIM and AC 00-45. Text CC BY 4.0, tool code MIT. For training, not operational use. Dataset behind the statistics: 121,001 METARs from 5,526 stations and 12,960 TAFs, NOAA Aviation Weather Center, 18 November 2026 to 19 November 2026. Full text of every English guide: https://tafrob.info/llms-full.txt ## METAR - [How to read a METAR, one group at a time](https://tafrob.info/metar/how-to-read-a-metar/): A METAR is read left to right in a fixed order: report type, station, day and UTC time, AUTO or COR, wind, visibility, runway visual range, present weather, cloud, temperature and dew point, pressure, then trend or remarks. ICAO reports use meters and hectopascals; US reports use statute miles, inches of mercury and a remarks section. - [The METAR station identifier and date-time group](https://tafrob.info/metar/station-identifier-and-time-group/): After METAR or SPECI comes the station's four-letter ICAO location indicator, such as KSEA or EGLL, then a six-digit group with the day of the month, hours and minutes in UTC, ending in Z. In 011955Z, the report is from the 1st at 19:55 UTC. Month and year are never coded, so you infer them from context. - [AUTO, COR and NIL: the METAR report modifiers](https://tafrob.info/metar/auto-cor-nil/): AUTO marks a report produced entirely by an automated system with no human input. COR marks a corrected report that replaces an earlier one with an error. NIL means the report is missing. ICAO puts COR before the station code, the US puts COR where AUTO would be, and Canada uses CCA, CCB and so on. - [The METAR wind group: direction, speed and units](https://tafrob.info/metar/wind-group/): The wind group is five digits plus a unit: three for the direction the wind blows from, in degrees true rounded to 10, and two for the speed, then KT or MPS. 27015KT is wind from 270 degrees at 15 knots. 00000KT is calm. ICAO averages over 10 minutes; US reports use 2 minutes. - [Variable wind in a METAR: VRB and dddVddd](https://tafrob.info/metar/variable-wind-vrb/): VRB replaces the wind direction when no single direction can be given, such as VRB03KT. A separate dddVddd group, such as 180V250, follows the wind group when the direction swings through a range, read clockwise from the first value to the second. ICAO and US rules use different speed thresholds. - [Gusts in a METAR: the G group, PK WND, WSHFT and squalls](https://tafrob.info/metar/gusts/): A gust is coded with G and a second speed in the wind group, as in 21015G28KT. ICAO reports it when the maximum exceeds the 10-minute mean by 10 knots or more; US rules use a 10-knot swing between peaks and lulls. A squall is different: a sustained jump of at least 16 knots to 22 or more, coded SQ. - [Visibility in a METAR: prevailing, minimum, meters and statute miles](https://tafrob.info/metar/visibility/): The METAR visibility group is the prevailing visibility, the greatest distance seen across at least half the horizon circle. ICAO countries code it in meters as four digits, with 9999 meaning 10 km or more. The US codes statute miles and fractions ending in SM, such as 3/4SM, and M1/4SM means less than one quarter mile. - [Runway visual range (RVR) in a METAR: how to decode R27L/1100U](https://tafrob.info/metar/runway-visual-range-rvr/): RVR is an instrument-derived distance a pilot may see down a runway. In ICAO reports R27L/1100U means runway 27 left, 1100 meters, tending upward over the previous 10 minutes. US reports use feet, as in R17L/2600FT. P means above the highest reportable value and M means below the lowest. It appears only in low visibility. - [The METAR present weather group: intensity, descriptor and phenomenon](https://tafrob.info/metar/present-weather-group/): A present weather group is assembled left to right: intensity or proximity, then a descriptor, then one or more phenomena. +SHRA is heavy rain shower, -DZRA is light drizzle and rain, and VCTS is thunderstorm in the vicinity. Each independent type of weather gets its own group, and US reports carry no more than three groups. - [CAVOK in a METAR and TAF: exact conditions and how it differs from NSC and NCD](https://tafrob.info/metar/cavok/): CAVOK, pronounced cav-oh-kay, replaces the visibility, weather and cloud groups when all of these hold at once: visibility of 10 km or more, no cloud below 5,000 ft or the highest minimum sector altitude (whichever is greater), no cumulonimbus or towering cumulus, and no significant weather. It is not used in US domestic reports. - [Temperature and dew point in a METAR: the TT/TdTd group explained](https://tafrob.info/metar/temperature-and-dew-point/): The METAR temperature group has two whole-degree Celsius values separated by a slash: air temperature first, dew point second, as in 21/19. A negative value takes the prefix M, so 01/M02 means 1 C and minus 2 C. A small gap between the two numbers signals moist air, and fog becomes likely as the gap approaches zero. - [QNH and altimeter setting in a METAR: Q1013 versus A2992](https://tafrob.info/metar/qnh-altimeter-setting/): The last group of the METAR body is the pressure for the altimeter. ICAO reports use Q and four digits in hectopascals, as in Q1013. The US and Canada use A and four digits in inches of mercury, with the decimal point left out, so A2992 means 29.92. Both are rounded down, never up, to the next reportable value. - [TREND forecast in a METAR: NOSIG, BECMG and TEMPO with FM, TL and AT](https://tafrob.info/metar/trend-forecast-nosig/): A TREND is a short landing forecast appended to a METAR or SPECI. It is valid for 2 hours from the report time and lists only the significant changes expected in wind, visibility, weather or cloud. NOSIG means no significant change is expected. BECMG describes a change, TEMPO a temporary fluctuation, with FM, TL or AT giving the times. - [Recent weather in a METAR: RE groups such as RERA, RETS and REFZRA](https://tafrob.info/metar/recent-weather-re/): An RE group reports weather that has ceased or decreased in intensity since the last routine report or within the last hour, whichever is shorter. It is written RE plus the weather code, such as RERA or RETS, and comes after the pressure group. It never carries an intensity sign, and only certain significant phenomena qualify. - [Wind shear in a METAR: reading WS R24 and WS ALL RWY](https://tafrob.info/metar/wind-shear-group/): The wind shear group is an optional supplementary group of the ICAO METAR. WS followed by a runway designator, such as WS R24, says wind shear was reported in the take-off or landing zone of that runway. WS ALL RWY covers every runway. It concerns the lowest 500 m (1,600 ft) and is used only where local circumstances warrant. - [Runway state group in a METAR: deposit, extent, depth and friction](https://tafrob.info/metar/runway-state-group/): The runway state group is an optional METAR group built from a runway designator and four coded values: deposit type, extent of contamination, depth of deposit and friction or braking action. SNOCLO replaces it when the aerodrome is closed by snow, and CLRD// says contamination has ceased. The Global Reporting Format has since moved this information to the runway condition report. - [METAR remarks (RMK): order, format and common codes](https://tafrob.info/metar/metar-remarks-rmk/): RMK ends the body of a METAR and introduces remarks, which elaborate on the report in coded or plain language. In the US, FMH-1 splits them into automated, manual and plain language remarks and additive and maintenance data, and asks for a set order. The WMO says the section carries national information, and the UK does not use it at civil aerodromes. - [AO1 and AO2 in a METAR: the automated station type](https://tafrob.info/metar/ao1-ao2/): AO1 and AO2 are remarks in US METAR and SPECI reports from automated stations. AO1 identifies a station without a precipitation discriminator, and AO2 a station with one. The discriminator tells liquid, freezing and frozen precipitation apart. The code follows RMK, and when it is absent, the station is a manual one. - [SLP in a METAR: how to decode sea level pressure](https://tafrob.info/metar/sea-level-pressure-slp/): SLP is the sea level pressure remark in a US METAR. SLP is followed by three digits in tenths of a hectopascal, with the leading hundreds and thousands digits dropped: SLP982 is 998.2 hPa and SLP132 is 1013.2 hPa. SLPNO means the value is not available. It is a separate value from the altimeter setting in the A group. - [T group in a METAR: hourly temperature to the tenth of a degree](https://tafrob.info/metar/t-group-hourly-temperature/): The T group is a US METAR remark that gives temperature and dew point to a tenth of a degree Celsius, such as T00261015 for 2.6 C and -1.5 C. After T, each value has a sign digit (0 positive, 1 negative) and three digits in tenths. Related groups starting with 1, 2 and 4 carry 6-hour and 24-hour extremes. - [Additive data groups in a METAR remarks section](https://tafrob.info/metar/additive-data-groups/): Additive data groups are coded remarks that follow the sea level pressure in US METARs from designated stations, mostly for climatology. Examples are Prrrr for hourly precipitation, 6RRRR for 3- and 6-hour precipitation, 7RRRR for 24 hours, 4/sss for snow depth, 933RRR for snow water equivalent, 98mmm for sunshine and 5appp for pressure tendency. - [The $ maintenance indicator and sensor status remarks in a METAR](https://tafrob.info/metar/maintenance-indicator-and-sensor-status/): In an automated US METAR, a trailing dollar sign means the system detected that maintenance is needed. Sensor status remarks such as PWINO, PNO, FZRANO, TSNO, VISNO LOC and CHINO LOC mean an equipped sensor is not operating, and RVRNO means a runway visual range that should be reported is missing. They flag missing data, not weather. - [SPECI, the special METAR: when it is issued, ICAO and US criteria](https://tafrob.info/metar/speci-special-report/): A SPECI is a special aerodrome weather report issued between routine METARs when conditions change past set criteria. It uses the same code as a METAR but starts with SPECI. ICAO criteria cover wind, visibility, cloud, thunderstorms and freezing precipitation. US criteria are fixed in FMH-1 and add items such as tornado and volcanic eruption. - [US vs ICAO METAR differences: a full comparison table](https://tafrob.info/metar/us-vs-icao-metar-differences/): US and ICAO METARs share one code, but national practice differs. The US averages wind over 2 minutes, ICAO over 10. The US reports visibility in statute miles, ICAO in meters. The US altimeter group starts with A in inches of mercury, ICAO with Q in hectopascals. CAVOK, TREND and NOSIG belong to the ICAO format only. - [The history of the METAR: from the US SA code to IWXXM](https://tafrob.info/metar/history-of-the-metar/): METAR is the international code for routine aerodrome weather reports. The Aviation Weather Handbook says the METAR and SPECI code was first developed in 1968. The US used its own SA code for over 30 years, converted international dissemination on January 1, 1996 and domestic dissemination on July 1, 1996. Today IWXXM carries METAR data in XML. ## TAF - [How to read a TAF, group by group](https://tafrob.info/taf/how-to-read-a-taf/): A TAF (Terminal Aerodrome Forecast) is a coded forecast for one airport, valid 9, 24 or 30 hours. Read it in order: report type, ICAO identifier, issue time, validity period, then the baseline wind, visibility, weather and cloud. Change groups follow: FM starts a new self-contained forecast, BECMG a gradual lasting change, TEMPO short fluctuations, PROB30 or PROB40 a lower-probability alternative. - [TAF validity period: how to read DDHH/DDHH](https://tafrob.info/taf/taf-validity-period/): The validity group sits right after the issue time and has the form DDHH/DDHH: start day and hour, then end day and hour, all in UTC. Subtract the start from the end to get the length. EU rules allow 9, 24 or 30 hours. The end hour 24 means midnight at the end of that day. In 0900/0924 the forecast runs for the whole 9th. - [FM group in a TAF: the FROM change group explained](https://tafrob.info/taf/fm-from-group/): FM means FROM. FM followed by day, hour and minute (FMddhhmm) starts a new self-contained part of the forecast at that exact time. It replaces everything written before it, so wind, visibility, weather and cloud must all be restated. The conditions then hold until the next FM or the end of validity. - [BECMG in a TAF: the gradual change group explained](https://tafrob.info/taf/becmg/): BECMG means becoming. It is followed by a start and an end time in whole UTC hours, and it describes conditions that reach or pass stated values at a regular or irregular rate at some unspecified time inside that period. The period must not exceed 4 hours. After the period, the new conditions continue as the prevailing ones. - [TEMPO in a TAF: temporary fluctuations explained](https://tafrob.info/taf/tempo/): TEMPO marks temporary fluctuations from the prevailing conditions. In the EU and NWS rules each fluctuation lasts under 1 hour (NWS: 1 hour or less) and together they cover less than half of the TEMPO period. The group is followed by a start and end time in whole hours and lists only the elements that change. - [PROB30 and PROB40 in a TAF: probability groups explained](https://tafrob.info/taf/prob30-prob40/): PROB30 and PROB40 give a 30 or 40 percent chance that the following conditions occur during a stated period. ICAO and EU rules allow only these two values, alone or as PROB TEMPO. Below 30 percent nothing is forecast, and from 50 percent the forecaster uses BECMG, TEMPO or FM instead. The NWS uses PROB30 only. - [TEMPO vs BECMG vs FM: the TAF change groups compared](https://tafrob.info/taf/tempo-vs-becmg-vs-fm/): FM starts a complete new forecast at an exact time and replaces everything before it. BECMG describes a lasting change that happens at some point inside a period of up to 4 hours. TEMPO describes short fluctuations, each under 1 hour, after which the prevailing conditions return. FM and BECMG change the base forecast; TEMPO does not. - [NSW in a TAF: what no significant weather means](https://tafrob.info/taf/nsw-no-significant-weather/): NSW means nil significant weather. It appears in a change group of a TAF or TREND, in the place of the weather group, to show that significant weather forecast earlier, such as rain, snow, fog or thunderstorms, is expected to end. It says nothing about cloud or visibility, which is how it differs from CAVOK and NSC. - [TX and TN in a TAF: the maximum and minimum temperature groups](https://tafrob.info/taf/tx-tn-temperature-groups/): TX and TN give the forecast maximum and minimum temperatures in a TAF, in whole degrees Celsius, each with the day and hour UTC it is expected. TX25/1013Z means a maximum of 25 degrees at 1300 UTC on the 10th. An M marks values below zero. The group is optional: WMO treats it as a regional form, and NWS civil TAFs do not use it. - [TAF AMD, COR and CNL: amended, corrected and cancelled TAFs](https://tafrob.info/taf/taf-amd-cor-cnl/): TAF AMD is an amended forecast issued when the current TAF no longer represents expected conditions. It covers the rest of the original validity period and replaces the earlier TAF as soon as it is issued. TAF COR corrects an error such as a typo or a wrong time. CNL, written after the valid period, cancels a TAF. NIL means the TAF is missing. - [Low level wind shear in a TAF: reading the WS group](https://tafrob.info/taf/low-level-wind-shear-in-taf/): The WS group forecasts non convective low level wind shear. WS020/27055KT means wind shear from the surface up to 2,000 feet above ground, with a wind of 270 degrees at 55 knots at the top of that layer. The second part is the wind at that height, not the amount of shear. US and Canadian TAFs use it; it sits after the cloud group. - [TAF vs METAR: what each report tells you](https://tafrob.info/taf/taf-vs-metar/): A METAR is an observation: the weather measured at an aerodrome at one moment, issued every hour or half hour. A TAF is a forecast: the most probable conditions expected over the next 24 or 30 hours, with change groups, issued every six hours. They share most codes but differ in timing, area and content, so pilots read the latest METAR against the current TAF. - [Using TAFs for flight planning: alternates, fuel and change groups](https://tafrob.info/taf/using-tafs-for-flight-planning/): Flight planning reads the TAF for a window around the estimated time of arrival. Under FAA rule 14 CFR 91.169, an IFR alternate is needed unless forecasts show at least a 2,000 foot ceiling and 3 miles visibility from 1 hour before to 1 hour after arrival. EASA guidance for air operators adds a table saying when BECMG, TEMPO and PROB groups count. - [How accurate are TAFs?](https://tafrob.info/taf/how-accurate-are-tafs/): A TAF gives the most probable value of each element, not a guarantee. EASA guidance sets operationally desirable targets: wind direction within 20 degrees and wind speed within 5 knots in 80% of cases, visibility within set margins in 80%, and cloud amount, cloud height and temperature in 70%. Forecast offices verify their TAFs against observations and amend them when needed. - [Military TAF groups: icing, turbulence and QNH](https://tafrob.info/taf/military-taf-icing-turbulence-groups/): US military TAFs add groups that civil TAFs leave out. A group starting with 6 forecasts icing, such as 620065: light rime icing from 600 to 5,600 feet above ground. A group starting with 5 forecasts turbulence. QNH3001INS gives the lowest altimeter setting expected, 30.01 inches of mercury. T and TM groups give maximum and minimum temperatures with their times. - [Thunderstorms in a TAF: TS, VCTS and CB](https://tafrob.info/taf/thunderstorms-in-taf/): A TAF forecasts a thunderstorm with TS, usually combined with precipitation as in TSRA, and always pairs it with a cumulonimbus layer such as BKN030CB. VCTS means a thunderstorm in the vicinity, 5 to 10 statute miles away in US TAFs. Uncertain storms go in PROB30 or TEMPO groups, and a FM group marks a thunderstorm starting or ending. ## Weather codes - [METAR weather codes: the complete list with the coding rules](https://tafrob.info/weather-codes/metar-weather-codes-list/): METAR present weather codes are two-letter abbreviations from WMO code table 4678, built left to right: intensity or proximity (-, no sign, +, VC), one descriptor (MI, BC, PR, DR, BL, SH, TS, FZ), then the phenomena: precipitation (DZ, RA, SN, SG, IC, PL, GR, GS, UP), obscurations (BR, FG, FU, VA, DU, SA, HZ, PY) and other (PO, SQ, FC, SS, DS). A report carries at most three groups. - [Intensity and vicinity in METAR: -, +, no sign and VC](https://tafrob.info/weather-codes/intensity-and-vicinity/): In a METAR, a minus sign means light, no sign means moderate and a plus sign means heavy (or well developed for funnel clouds and dust whirls). Intensity applies to precipitation, not to fog or haze. VC means in the vicinity: in the US, 5 to 10 statute miles from the point of observation; under WMO guidance, roughly 8 to 16 km from the aerodrome reference point. VC never carries an intensity sign. - [VCSH, VCTS and VCFG: weather in the vicinity](https://tafrob.info/weather-codes/vcsh-vcts-vcfg/): VC means in the vicinity: near the aerodrome but not at it. VCSH is a shower in the vicinity, VCTS a thunderstorm and VCFG fog. In US METARs the vicinity is 5 to 10 statute miles from the point of observation; ICAO texts place it within about 8 km of the aerodrome. VC never takes an intensity sign, and VCSH does not give the precipitation type. - [MI, BC and PR: shallow, patches and partial fog](https://tafrob.info/weather-codes/mi-bc-pr-shallow-patches-partial/): MI, BC and PR are descriptors used only with fog. MIFG is shallow fog, lying in a thin layer near the ground; BCFG is fog patches spread randomly over the aerodrome; PRFG is fog covering a substantial part of the aerodrome while the rest is clear. All three can be reported while the prevailing visibility is 1000 m or more, because the fog does not cover the whole aerodrome or the observer's eye level. - [DR and BL: drifting and blowing snow, dust and sand](https://tafrob.info/weather-codes/dr-bl-drifting-blowing/): DR and BL describe snow, dust or sand raised from the ground by the wind. DR, low drifting, means the particles stay below about 2 m (6 ft in US practice) and do not reduce visibility at eye level. BL, blowing, means they rise to 2 m or more and reduce horizontal visibility. DRSN and BLSN are the common snow codes; BLSN can be reported with SN when snow is also falling. - [SH: showers in METAR and TAF](https://tafrob.info/weather-codes/sh-showers/): SH is the descriptor for showers: precipitation from convective cloud that starts and stops abruptly and changes intensity quickly. It is combined with the precipitation type, as in SHRA (rain showers), SHSN (snow showers), SHGS (small hail or snow pellets) and SHGR (hail). A sign in front gives the intensity, as in +SHRA. VCSH is different: showers near the aerodrome, of unknown type. - [TS: thunderstorms in METAR and TAF](https://tafrob.info/weather-codes/ts-thunderstorm/): TS is the thunderstorm descriptor. Alone, it means thunder is heard at the aerodrome with no precipitation falling there. Combined with precipitation, it gives codes such as TSRA (thunderstorm with rain), TSSN or TSGR, with the intensity sign applying to the precipitation, as in +TSRA. In US practice a thunderstorm begins when thunder is first heard and ends 15 minutes after the last thunder or lightning. - [FZ: freezing rain, drizzle and fog](https://tafrob.info/weather-codes/fz-freezing-rain-drizzle-fog/): FZ is the freezing descriptor. It is used only with rain, drizzle and fog: FZRA is freezing rain, FZDZ freezing drizzle and FZFG freezing fog. It marks supercooled water drops, liquid below 0 °C, that freeze on impact with the ground or an aircraft. Freezing rain and drizzle form clear ice or glaze; freezing fog normally deposits rime. All three are an icing hazard. - [DZ: drizzle in METAR and TAF](https://tafrob.info/weather-codes/dz-drizzle/): DZ is drizzle: fairly uniform precipitation of very fine water drops, less than 0.5 mm in diameter, falling from low stratiform cloud. The drops are so small and close together that they seem to float. Intensity is shown with a sign, as in -DZ or +DZ. US observers set it from visibility, while WMO-No. 782 gives rates of 0.1 and 0.5 mm per hour. FZDZ is freezing drizzle. - [RA: rain in METAR and TAF](https://tafrob.info/weather-codes/ra-rain/): RA is rain: liquid drops larger than 0.5 mm in diameter, or smaller drops that are widely separated. A sign gives the intensity: -RA light, RA moderate, +RA heavy. The thresholds depend on the rules: WMO-No. 782 uses 2.5 and 10 mm per hour, FMH-1 uses 0.10 and 0.30 inch per hour. Rain from convective cloud is coded SHRA, and with thunder TSRA. - [SN: snow in METAR and TAF](https://tafrob.info/weather-codes/sn-snow/): SN is snow: ice crystals, mostly branched six-pointed stars, falling alone or stuck together as flakes. A sign gives the intensity: -SN light, SN moderate, +SN heavy. US observers set it from visibility, with heavy snow at 1/4 statute mile or less, while WMO-No. 782 uses the water equivalent and CAP 746 the accumulation rate. SHSN is snow showers and BLSN blowing snow. - [SG: snow grains in METAR and TAF](https://tafrob.info/weather-codes/sg-snow-grains/): SG is snow grains: very small, white, opaque particles of ice, fairly flat or elongated, generally less than 1 mm across. WMO-No. 782 and CAP 746 call them the frozen equivalent of drizzle, because they fall from layer cloud in the same way. SG takes an intensity sign (-SG, SG, +SG) but no SH or TS descriptor. It should not be confused with SN, GS or IC. - [PL and IC: ice pellets and ice crystals in METAR and TAF](https://tafrob.info/weather-codes/pl-ice-pellets-ic-ice-crystals/): PL is ice pellets: hard, transparent or translucent grains of ice, 5 mm or less, formed from frozen raindrops or largely melted and refrozen snowflakes. They can signal freezing rain at higher levels. PL takes an intensity sign. IC is ice crystals, also called diamond dust: unbranched needles, columns or plates. IC never takes an intensity sign. - [GR and GS: hail, small hail and snow pellets in METAR and TAF](https://tafrob.info/weather-codes/gr-gs-hail/): GR is hail: balls or pieces of ice falling from deep cumuliform cloud, 5 mm or more across under WMO-No. 782 and CAP 746. GS covers small hail and snow pellets, below 5 mm. Both come with SH or TS, as in SHGR or +TSRAGR. GR never takes an intensity sign. US reports add the size of the largest hailstone in remarks, as in GR 1 3/4. - [UP: unknown precipitation in METAR reports](https://tafrob.info/weather-codes/up-unknown-precipitation/): UP means unknown precipitation. It is used only by automated stations, when the sensor detects that precipitation is falling but cannot tell which type it is. FMH-1 codes UP without an intensity sign, while CAP 746 allows one. UP is not used in a TAF. When the present weather sensor itself fails, US reports add PWINO in the remarks instead. - [BR: mist in METAR and TAF](https://tafrob.info/weather-codes/br-mist/): BR is mist: tiny water droplets in the air that reduce visibility, but less than fog. Under WMO-No. 782 and CAP 746, BR is reported with visibility from 1000 m to 5000 m; in US practice, from 5/8 statute mile to less than 7 miles. Below that range it is fog, FG. Mist needs humid air, at least 95% relative humidity in UK guidance; drier air points to haze. - [FG: fog in METAR and TAF](https://tafrob.info/weather-codes/fg-fog/): FG is fog: water droplets suspended at the surface that reduce visibility below 1000 m under WMO-No. 782, or below 5/8 statute mile in US practice. Above that it is mist, BR. FZFG is fog below 0 °C, which can deposit rime. MIFG, BCFG and PRFG describe shallow, patchy and partial fog and may come with a higher visibility. VCFG is fog in the vicinity. - [HZ: haze in METAR and TAF](https://tafrob.info/weather-codes/hz-haze/): HZ is haze: a suspension of extremely small dry particles, invisible to the naked eye, that gives the air an opalescent look and reduces visibility. Under WMO-No. 782 and CAP 746, HZ is reported only with visibility of 5000 m or less. Unlike mist, haze is dry: CAP 746 links it to relative humidity below 95%. US reports may show HZ with higher visibility. - [FU: smoke in METAR and TAF](https://tafrob.info/weather-codes/fu-smoke/): FU is smoke: a suspension of small particles produced by combustion, from wildfires, industry or other burning. Under WMO-No. 782 and CAP 746, FU is reported only with visibility of 5000 m or less. Smoke is dry, so it may be reported below 1000 m only when the air is not close to saturation. A smoke layer above the station goes in the remarks, as in RMK FU BKN020. - [VA: volcanic ash in METAR and TAF](https://tafrob.info/weather-codes/va-volcanic-ash/): VA is volcanic ash: fine particles of rock powder from a volcano that can stay in the air for a long time. Unlike other obscurations, VA is always reported when observed, whatever the visibility, and US TAFs always forecast it when expected, with a visibility group even if unrestricted. Ash in flight is covered by Volcanic Ash Advisories from the VAACs and by SIGMETs. - [DU and SA: dust and sand in METAR and TAF](https://tafrob.info/weather-codes/du-sa-dust-sand/): DU is widespread dust and SA is sand, both dry particles that reduce visibility. When the wind lifts them from the ground, the descriptors DR (below 2 m or 6 feet) and BL (at or above that height) give DRDU, DRSA, BLDU and BLSA. WMO-No. 782 reports DU and SA only with visibility of 5000 m or less, but drifting forms may appear at any visibility. - [PO: dust and sand whirls in METAR and TAF](https://tafrob.info/weather-codes/po-dust-whirls/): PO is a dust or sand whirl, commonly called a dust devil: a rapidly rotating column of air over hot, dry ground that lifts dust, sand and small litter. It is a few metres across and usually no higher than a few hundred feet. +PO means well developed whirls, and VCPO means whirls in the vicinity. Strong ones can carry winds of 60 mph or more. - [SQ: squalls in METAR and TAF](https://tafrob.info/weather-codes/sq-squalls/): SQ is a squall: a sudden increase in wind speed of at least 16 knots, with the speed rising to 22 knots or more and lasting at least one minute. The duration separates it from a gust, which is coded with G in the wind group. Squalls come with strong convection and active cold fronts, and SQ takes no intensity or vicinity sign. - [FC: funnel clouds, tornadoes and waterspouts in METAR and TAF](https://tafrob.info/weather-codes/fc-funnel-cloud-tornado/): FC is a funnel cloud: a rotating column of air hanging from the base of a cumulonimbus that does not reach the ground. +FC is a tornado over land or a waterspout over water, when the column reaches the surface. Only the plus sign is allowed. US reports add a remark such as TORNADO B13 6 NE, and TAFs forecast FC only rarely. - [SS and DS: sandstorms and duststorms in METAR and TAF](https://tafrob.info/weather-codes/ss-ds-sandstorm-duststorm/): SS is a sandstorm and DS a duststorm: particles of sand or dust raised energetically by a strong, turbulent wind over a wide area. They are among the few non precipitation codes that take intensity, as +SS or +DS. US TAF guidance codes SS or DS when visibility is above a quarter mile and at most half a mile, and +SS or +DS at a quarter mile or less. - [PY: spray and blowing spray in METAR and TAF](https://tafrob.info/weather-codes/py-spray/): PY is spray: water droplets torn by the wind from an extensive body of water, usually from the crests of waves, and carried a short distance into the air. FMH-1 codes it only as BLPY, blowing spray, when it rises to 6 feet or more and reduces visibility below 7 statute miles. It is a rare code, seen mostly at coastal and lakeside stations. ## Clouds & ceiling - [FEW, SCT, BKN and OVC: cloud cover codes in METAR and TAF](https://tafrob.info/clouds/cloud-cover-codes-few-sct-bkn-ovc/): FEW, SCT, BKN and OVC give the amount of sky covered by a cloud layer, in eighths of the sky called oktas. FEW is 1 to 2 oktas, SCT 3 to 4, BKN 5 to 7 and OVC 8. Each code is followed by the height of the layer base in hundreds of feet, so BKN025 is a broken layer at 2,500 feet above the aerodrome. - [What is a ceiling? The lowest broken or overcast layer](https://tafrob.info/clouds/what-is-a-ceiling/): A ceiling is the height above the ground of the lowest cloud layer reported as broken or overcast, or of the vertical visibility into an obscuration. In a METAR it is read from the first BKN, OVC or VV group: BKN008 OVC020 gives a ceiling of 800 feet. FEW and SCT layers never form a ceiling, however low they are. - [CB and TCU: cumulonimbus and towering cumulus in METAR and TAF](https://tafrob.info/clouds/cb-tcu-cumulonimbus-towering-cumulus/): CB is cumulonimbus and TCU is towering cumulus, the only two cloud types written in the cloud group of a METAR or TAF. The type follows the height with no space, as in SCT030CB or BKN025TCU. Both mark strong convection: CB is the thunderstorm cloud, and TCU is a cumulus with strong vertical growth that may become one. - [SKC, CLR, NSC and NCD: the no cloud codes in METAR and TAF](https://tafrob.info/clouds/skc-clr-nsc-ncd/): Four codes replace the cloud group when no layer is reported. SKC is sky clear from a human observer. CLR is used by US automated stations when no cloud is detected at or below 12,000 feet. NSC means no cloud of operational significance and no CB or TCU. NCD means an automatic system detected no cloud. None of them is the same as CAVOK. - [Cloud height coding: the three digits after FEW, SCT, BKN and OVC](https://tafrob.info/clouds/cloud-height-coding/): The three digits after a cloud amount give the height of the layer base in hundreds of feet above the aerodrome. BKN012 is a broken layer at 1,200 feet. WMO rules round down to 100 foot steps up to 10,000 feet and 1,000 foot steps above. US rules add 500 foot steps between 5,000 and 10,000 feet. - [VV: vertical visibility when the sky is obscured](https://tafrob.info/clouds/vertical-visibility-vv/): VV stands for vertical visibility. It replaces the cloud group when fog, snow or another obscuration hides the sky, so no cloud base can be seen. The three digits give, in hundreds of feet, how far the observer or sensor can see upward: VV003 is 300 feet. VV counts as a ceiling, and VV/// means the vertical visibility could not be assessed. - [Ceilometer: how airports measure cloud height](https://tafrob.info/clouds/ceilometer-how-cloud-height-is-measured/): A ceilometer is an instrument that measures the height of cloud bases or the vertical visibility straight above it. Automated stations build the cloud group of a METAR from its readings over the last 30 minutes. A US ASOS ceilometer reports cloud up to 12,000 feet, so CLR means no cloud detected at or below that height, not a clear sky. - [Flight categories: VFR, MVFR, IFR and LIFR](https://tafrob.info/clouds/flight-categories-vfr-mvfr-ifr-lifr/): Flight categories sort a station's weather into four classes from its ceiling and visibility. LIFR is a ceiling below 500 feet or visibility below 1 statute mile, IFR below 1,000 feet or 3 miles, MVFR 1,000 to 3,000 feet or 3 to 5 miles, and VFR above 3,000 feet and 5 miles. The worse of the two values decides. They are a US situational awareness tool, not legal minimums. - [Cloud types for pilots: the ten genera and what they mean in flight](https://tafrob.info/clouds/cloud-types-for-pilots/): Clouds are sorted into ten genera in three levels: high (cirrus, cirrocumulus, cirrostratus), middle (altocumulus, altostratus, nimbostratus) and low (cumulus, stratocumulus, stratus, cumulonimbus). Each type hints at turbulence, icing or low ceilings. A METAR names only CB and TCU in its cloud group; US observers may describe other significant types in remarks. ## Other reports - [SIGMET: how to read the en route hazard warning](https://tafrob.info/reports/sigmet/): A SIGMET is a short warning of hazardous en route weather such as severe turbulence, severe icing, thunderstorms, volcanic ash or a tropical cyclone. It is unscheduled and valid up to 4 hours, or 6 hours for volcanic ash and tropical cyclones. It is replaced by a new number, never amended. The US issues convective SIGMETs separately. - [Convective SIGMET: how to read the US thunderstorm warning](https://tafrob.info/reports/convective-sigmet/): A convective SIGMET is a US advisory for significant thunderstorm activity over the contiguous states. The Aviation Weather Center issues it hourly in three bulletins, East, Central and West. It is valid for 2 hours or until superseded. It covers lines, areas and embedded or severe thunderstorms, and a NONE message is sent when nothing qualifies. - [AIRMET: how to read Sierra, Tango and Zulu](https://tafrob.info/reports/airmet/): An AIRMET is a US advisory for weather hazards of lower intensity than a SIGMET, written for all pilots and especially VFR pilots. AIRMET SIERRA covers IFR conditions and mountain obscuration, TANGO covers moderate turbulence, strong surface wind and low-level wind shear, and ZULU covers moderate icing and freezing level. Text AIRMETs remain for Alaska and Hawaii. - [G-AIRMET: how to read the graphical AIRMET](https://tafrob.info/reports/g-airmet/): A G-AIRMET is the graphical AIRMET issued by the US Aviation Weather Center. It gives forecast snapshots at 0, 3, 6, 9 and 12 hours for IFR and mountain obscuration, turbulence, strong wind, low-level wind shear, icing and freezing level. The contiguous states receive a new issuance every 6 hours, and the data is published in BUFR and XML. - [GAMET: how to read the low-level area forecast](https://tafrob.info/reports/gamet/): A GAMET is an ICAO area forecast for low-level flights, covering phenomena hazardous below about FL100, or FL150 in mountainous areas. It supports the SIGMET system by describing weaker hazards such as widespread strong wind or low visibility. It is issued where regional agreements provide for it. In the United Kingdom the GAMET replaced the AIRMET. - [PIREP: how to read a pilot weather report, field by field](https://tafrob.info/reports/pirep-pilot-report/): A PIREP is a pilot weather report in a fixed U.S. format. It starts with a station, the type UA (routine) or UUA (urgent), then slash-coded fields: /OV location, /TM time, /FL altitude, /TP aircraft, plus optional sky, weather, temperature, wind, turbulence, icing and remarks. Altitudes are MSL and times are UTC. - [Winds aloft forecast (FB): how to decode direction, speed and temperature](https://tafrob.info/reports/winds-aloft-forecast-fb/): The FB winds and temperatures aloft forecast gives, for each level, a code DDff+TT: direction in tens of degrees true, speed in knots, temperature in Celsius. 9900 means light and variable. Speeds of 100 knots or more add 50 to the direction digits. Above 24,000 feet the temperature sign is omitted because it is always negative. - [ATIS: what the airport information broadcast says and how to use it](https://tafrob.info/reports/atis/): ATIS is a continuous recorded broadcast of routine airport information: wind, visibility, sky condition, temperature, dew point, altimeter, runways and approaches in use, and notices. Each version has an identifying letter. Pilots listen before contacting the controller and then state the letter, for example information Sierra received. - [VOLMET: how in-flight weather broadcasts work](https://tafrob.info/reports/volmet/): VOLMET is meteorological information for aircraft in flight. A voice VOLMET is a continuous, repeating broadcast of current METARs, sometimes with TAFs and SIGMETs, for a set of aerodromes. In the United Kingdom, four VHF channels each carry nine or ten stations, in English, around the clock, with the elements spoken in METAR order. - [Significant weather charts (SIGWX): what they show and how to read them](https://tafrob.info/reports/significant-weather-charts-sigwx/): A SIGWX chart is a forecast of significant en route weather: jet streams, thunderstorms, turbulence, icing, tropopause height, tropical cyclones and volcanic eruptions. The world area forecast centres in Washington and London produce the global charts. The Aviation Weather Center says its WAFS charts should not be used as briefing charts. - [Graphical Forecasts for Aviation (GFA): the map that replaced the FA](https://tafrob.info/reports/graphical-forecasts-for-aviation-gfa/): The Graphical Forecasts for Aviation (GFA) is the Aviation Weather Center web tool that shows observations and forecasts for clouds, weather, icing, turbulence and winds on a map. It became operational on April 13, 2017 and replaced the six text Area Forecasts for the contiguous US, which ceased on October 10, 2017. - [Volcanic Ash Advisory (VAA): how to read the ash cloud forecast](https://tafrob.info/reports/volcanic-ash-advisory/): A Volcanic Ash Advisory (VAA) is a text product from a Volcanic Ash Advisory Center that gives the extent and forecast movement of an ash cloud after an eruption, with positions at +6, +12 and +18 hours. It is issued as necessary and at least every 6 hours. The meteorological watch office uses it to issue a VA SIGMET. - [Space weather advisory (SWX): how to read the ICAO message](https://tafrob.info/reports/space-weather-advisory/): A space weather advisory is an ICAO message issued when solar activity reaches a moderate (MOD) or severe (SEV) threshold for HF communications, satellite communications, GNSS navigation or radiation above FL250. It gives the observed effect and forecasts at 6, 12, 18 and 24 hours. It is not a SIGMET. - [SNOWTAM and the Global Reporting Format: reading runway condition reports](https://tafrob.info/reports/snowtam-global-reporting-format/): A SNOWTAM is the NOTAM-class message that reports runway surface conditions. Since the ICAO Global Reporting Format became applicable on November 4, 2021, it gives a Runway Condition Code from 0 to 6 for each third of the runway, with coverage, depth and contaminant type. It is valid for at most 8 hours and replaces the previous one. ## Tools - [METAR decoder: from raw report to plain English](https://tafrob.info/tools/metar-decoder/): A METAR decoder splits a raw report into its groups and rewrites each one in plain language: station, time, wind, visibility, weather, clouds, temperature, dew point and pressure. The decoder on this page applies the metar-taf-parser library to the text pasted in. It shows each value with its unit and converts statute miles, inches of mercury and hectopascals. It is a reading aid, not an operational source. - [TAF decoder: from raw forecast to plain English](https://tafrob.info/tools/taf-decoder/): A TAF decoder splits a terminal aerodrome forecast into its base conditions and change groups, then rewrites each period in plain language with real dates and times. The decoder on this page applies the metar-taf-parser library to the pasted text and shows issue time, validity, TX and TN temperatures, and each BECMG, TEMPO, FM and PROB group. It does not display the US wind shear group. It is a reading aid only. - [Crosswind calculator: crosswind and headwind components](https://tafrob.info/tools/crosswind-calculator/): The crosswind component is the wind speed multiplied by the sine of the angle between the wind direction and the runway heading, and the headwind component uses the cosine. A 15 kt wind from 310 degrees on runway 27 makes an angle of 40 degrees, which gives about 9.6 kt of crosswind and 11.5 kt of headwind. A negative headwind value means a tailwind. - [Density altitude calculator: formula and worked example](https://tafrob.info/tools/density-altitude-calculator/): Density altitude is pressure altitude corrected for nonstandard temperature, and it tells how the air makes an airplane perform. The calculator converts the altimeter setting to station pressure, builds a virtual temperature that includes the dew point, and applies the NWS equation. With a field at 5,000 ft, an altimeter of 30.02 inHg, 30 degrees Celsius and a dew point of 10, the result is about 7,888 ft. - [Cloud base calculator: estimating cumulus height from the spread](https://tafrob.info/tools/cloud-base-calculator/): The cloud base of convective cumulus is estimated by dividing the spread between temperature and dew point by 2.5 and multiplying by 1,000 feet. That is 2.5 degrees Celsius of spread per 1,000 feet, or about 4.4 degrees Fahrenheit in the usual rule of thumb. A 5 degree spread gives about 2,000 feet above ground. The rule does not apply to fog, stratus or frontal cloud. - [Pressure converter: hPa to inHg and the METAR Q and A groups](https://tafrob.info/tools/pressure-converter-hpa-inhg/): One inch of mercury equals 33.8639 hectopascals, so 29.92 inHg is 1013.2 hPa. The METAR writes the same setting as Q followed by whole hectopascals, or A followed by hundredths of an inch with no decimal point. A pressure lower than standard raises the pressure altitude, by about 27 feet per hectopascal in the calculator and 29.5 feet by the 1,000 feet per inch rule. - [Zulu time converter: decoding the DDHHMMZ group](https://tafrob.info/tools/zulu-time-converter/): Zulu is the aviation name for UTC. A METAR time group has six digits followed by Z: two for the day of the month, two for the hour and two for the minute, so 191450Z is the 19th at 14:50 UTC. The month is never coded. The converter picks the month that places the date closest to the current moment, and shows the result in UTC and in local time. - [Relative humidity from temperature and dew point](https://tafrob.info/tools/relative-humidity-from-dew-point/): Relative humidity is the ratio of the saturation vapor pressure at the dew point to the saturation vapor pressure at the air temperature. The calculator uses the Magnus formula with the coefficients 17.625 and 243.04 and reports humidity in percent, the spread in degrees Celsius and the vapor pressure in hectopascals. A spread of zero gives 100 percent, and at 20 C a spread of 8 degrees gives about 60 percent. ## Open data - [METAR statistics: method, tables and caveats](https://tafrob.info/data/metar-statistics/): This study counts how often each element appears in METARs, using hourly snapshots of the NOAA Aviation Weather Center cache. Identical report texts are counted once, elements are detected with text patterns applied to the report body (before RMK), and each share is the number of matching reports divided by all distinct reports in the sample. - [TAF statistics: groups, change indicators and validity](https://tafrob.info/data/taf-statistics/): This study counts how often change groups and other elements appear in TAFs, using snapshots of the NOAA Aviation Weather Center TAF cache. Identical forecast texts are counted once, elements are found with text patterns, and each share is the number of matching forecasts divided by all distinct forecasts in the sample. - [Units in METAR by country: knots, m/s, hPa, inHg and miles](https://tafrob.info/data/units-in-metar-by-country/): A METAR states wind in knots or metres per second, visibility in metres, kilometers or statute miles, and pressure in hectopascals or inches of mercury, depending on the country. ICAO international practice uses Q for hectopascals; the United States and Canada use statute miles and an A group in inches of mercury. The table counts the units actually found in each region. - [ICAO airport codes: how location indicators work](https://tafrob.info/data/icao-airport-codes/): An ICAO airport code is a four-letter location indicator that identifies a station in METAR and TAF and in flight planning. Its first letter marks a world region, and in some regions the second letter marks the country. It differs from the three-letter IATA code used for tickets and baggage. In the contiguous US, the ICAO code is K plus the three-letter identifier. - [METAR and TAF data sources: APIs, cache files and archives](https://tafrob.info/data/metar-taf-data-sources-and-apis/): Current METAR and TAF data is available from the Aviation Weather Center Data API, limited to 100 requests per minute, 400 entries per request and 30 days of history, or from gzipped cache files updated once a minute. For older reports, the Iowa Environmental Mesonet, NOAA ISD and Ogimet offer archives. - [Open-source METAR and TAF parsers compared: language, licence and upkeep](https://tafrob.info/data/open-source-metar-taf-parsers/): Five open-source libraries were compared on 2026-11-19: metar-taf-parser for TypeScript, python-metar-taf-parser, python-metar, avwx-engine and a Java METAR and TAF parser. Four use the MIT license, python-metar uses a BSD-style text that GitHub does not classify, and python-metar handles METAR only according to its description. - [Aviation weather abbreviations: an A to Z glossary](https://tafrob.info/data/aviation-weather-abbreviations/): Aviation weather reports compress text into short contractions such as BKN, TEMPO, FZRA or OBSC. Most come from the key in the FAA Aeronautical Information Manual for METAR and TAF, the PIREP table in the same manual, and the WMO Technical Regulations (WMO-No. 49, Volume II) for SIGMET and significant weather charts. This glossary lists them by letter. - [IWXXM explained: the XML form of METAR, SPECI and TAF](https://tafrob.info/data/iwxxm/): IWXXM is the ICAO Meteorological Information Exchange Model, a WMO-maintained XML representation of aviation weather reports such as METAR, SPECI and TAF, described as the official representation required by ICAO Annex 3. It carries the same content as the text codes in a machine-readable form, and text reports remain in use alongside it. - [ASOS and AWOS: how automated weather stations observe](https://tafrob.info/data/asos-awos-automated-weather-stations/): ASOS and AWOS are the two main automated observing systems in the United States. ASOS is a joint effort of the NWS, FAA and DOD and issues hourly and special reports. AWOS is similar but generally reports fewer elements, and comes in six types. Automated reports carry AUTO unless a certified human augments them. - [Where METAR and TAF rules come from: ICAO, WMO and national authorities](https://tafrob.info/data/where-metar-taf-rules-come-from/): METAR and TAF rules form a chain. ICAO Annex 3 sets the international standards, the WMO publishes the technical regulations and the code manuals, and each state adds its own documents, such as the US FAA order JO 7900.5E and NWS instruction 10-813. ICAO texts are sold, while WMO and US documents are mostly free. ## Optional - [About and editorial method](https://tafrob.info/about/)